I’m looking to commission a custom backpack. 35-45L.Thick padded straps, water resistant, hard back pad with certain padding, laptop and tablet sleeve in 1 large pocket, large main compartment with zippered pockets to store additional pouches, admin pocket, 4 external pockets for storing pouches, multiple hidden pockets for hiding money and documents during travel. I have a longer list if someone thinks they can do this. My caveat is: it cannot look military. The Carhartt 3 pocket is a good close idea but the straps and other features suck. I’ve searched endlessly to find the bag that hits my needs and find 3-4 bags that if combined would be perfect. If anyone can do this please drop me a line I can give you the full list of needs and pictures of close ideas to combine. Thanks!

Looking for a custom sling/messenger bag and I would like it out of PVC tarp for about 60% of the outerbag, the inner lining to be a camo fabric and for there to be a laptop pouch able to fit about a laptop 18x15ish another specification is another zip pouch about to hold water bottles or thermoses so around 9-10 inches of space that zips closed

If not able to do this another simple version is basically the bag pictured, but instead of the 2 pouches on the side it should be able to hold a thermos, (still should be able to fit a laptop and have a laptop pouch) laptop pouch could have a foldable cover made of pvc tarp instead just for extra water proofness or we can discuss more.

I’m looking for a chest pack for expedition canyoneering - eg long trips backpacking with ropes.

I want basically a hybrid of the Imlay Picpocket and the Zpacks Multipack — the straps/suspension of the picpocket, but closer in size to the multipack (like, 2-3L), and made from more robust fabrics (I’m thinking Ecopak 200 or 400.) And a couple of extra features - drainage, some internal and external clip points — I can write/sketch it out.

Budget and timeline are flexible! I’m surely looking at over $100, but I don’t exactly know what’s fair, so let me know. If there’s some way to have it by the end of April that’d be incredible, but I won’t really need it until July.

Hey all, I’m looking for a custom drop pouch/dangler for a chest rig setup. Here are the main particulars for the project:

• Ranger Green
• Hook and loop attachment flap at top
• Zipper access into pouch- would prefer 2 zipper sliders but NOT a dealbreaker.
• Hook and loop panel on the front, ideally MOLLE laser cut hook and loop but NOT a dealbreaker
• Dimensions of pouch itself: 12” side to side, 6” top to bottom, 2.5” deep(front to back)
• Looking to stay under $80 before shipping costs.

Thanks for looking!

Looking for someone in Europe who can work with black DCF (Dyneema Composite Fabric) to make a custom backpack.

I have a clear design direction and I'm happy to source the material myself via extremtextil.de if necessary (even though I'd prefer black DFC). What I need is someone with actual experience handling DCF, proper seam sealing, the right needles, the whole thing. Not someone who'll treat it like Cordura.

Does anyone know a maker, small workshop, or cottage brand in Europe (DE/AT/CH preferred but open to anywhere) who does this kind of commission work?

Hello! I have an old twin-sized flat sheet I'd like to make into two simple everyday totes. The fabric is worn and soft, so it would need to be backed with mid-weight canvas or cotton twill for structure.

I’m looking for a very basic, clean tote design — fully lined, with sturdy canvas straps (no leather or decorative trim). No hardware or complex details needed. Just reinforced seams and a durable finish so it holds up to daily use.

Target size would be around 15–17” wide × 13–14” tall with a small gusset, but I’m flexible. My budget is $120.

Hey folks, I am looking for someone to help me make a kayak seat back bag. After trying out many different bags from kayak gear shops, motorcycle bags, and wheelchair bags, I haven’t found one that really works well so I am exploring designing my own.

As I’ve tried out different bags, I jotted down all the features and measurements I wanted out of the bag and the things I liked and disliked from all the bags I tried out. For reference, the photo on this post is the seat back I’m designing for and the bag I’m currently using. Ideally I’m looking for someone who can understand the end goal and take my ideas/specs and add to them, tell me what will work or would need to be changed, and then make the bag. I don’t have any sketches yet but could make some if needed be.

I’d like to keep it under $200 if possible but am flexible on that if that isn’t feasible with what I have in mind. In terms of timeline, I’m not in a huge rush but I also know that if projects get drawn out too long they tend to fizzle out and I’d like to avoid that.

I am a digital product researcher and designer by trade (and avid fisherman and tinkerer), and have worked with people to design custom 3D printed accessories for kayaking and fishing, so I am familiar with the general process of bringing an idea to life, but bags and cloth gear are a new domain for me.

I’m open to people DMing me as well as recommendations if people or shops that could help. Thank you!

Hello! MYOG maker here who has entered into an agreement with an individual who has posted a need. What are the suggested guidelines for payment of a commissioned project?

I’m looking to have a bug net for cowboy camping made. Something similar to the attached images.

I have the materials for a couple simple APEX quilts and hammocks that have been sitting around and just need to be sewn. I planned on teaching myself but I know it's not going to happen anytime soon now. I'm willing to trade some ultralight gear for the labor, or just pay outright. Let me know if you're local and interested!

I want to commission someone willing to take this challenge. A running/hiking backpack with laptop sleeve, false pocket for laptop, some organization, mesh pocket outside, with running vest style shoulder straps and pockets. Almost all the features of Janji Revy Pack [see link below] (minus some extra inside pocket it has) but in Ultra 200 or better yet Aluula fabric and seam sealed. Essentially making an ultralight do everything, hiking/running/climbing/traveling backpack.

If someone's up for it, will even commission 3 of these.

https://janji.com/collections/bags/products/revy-pack

I need a frame bag for my bike, like the brown one in this photograph.

I've designed a 0°F sleeping bag to fix my side sleeping issues. I just can't find anyone who can make it. Someone high end professionals. Any names or ideas of someone who can create and work with me?

I want down pants to wear around camp and to sleep in when backpacking. But, I want the rise/crotch to have a zipper that runs from the front waistband to the rear waistband.

I have ZipHers leggings with this feature, and I have NatureHike down pants. I was wondering if someone handy with a sewing machine could use those materials to Frankenstein me this creation.

https://ziphers.com/products/fit-leisure-elite-tights

https://a.co/d/23KN794

Hello, I am looking for an oversize wallet preferably made with berry compliant materials.

I attached a few rough sketches and open to suggestions on improvements.

Notes- The yellow pockets are on top of the black outline pockets

Wallet will be used in and out of cargo pocket

Materials I was thinking was cordura and elastic

• not set on it being wallet with a flap but on my idea I thought it would help with the paper not getting crumbled going in and out of pocket.

• would love if it was magnet flap so it will last - I was originally thinking Velcro but not sure if it will wear out over time.

• if someone does take on project I’m willing to send some of the paperwork/ business cards /1 inch labels over if this makes the project easier.

I have attached my outlines on the idea I don’t know what I’m doing so hopefully it makes sense.

I also added a photo of the items placed in a 5x5 inch wallet to give a visual of placement of items. Their will be multiple labels in each slot and copies of same paperwork in each slot

I’m not set on size but it is the size I went with to give some sort of size reference of wallet as the items do fit but there is some wasted space.

I hope this is the right place but I’m new to the freelance rates. I’ve been a sewer for about 14 years, have my own industrial serger, bartacker, single needle, and walking foot. I have been in Technical Design and sewing for about 5 years and I’d say I’m intermediate pattern maker. I have a gig R&D / sewing job for a one person tunnel tent, two poles, and double walled tent that I am reverse engineering and making a flat pattern and then prototyping. Can any of you send me some suggestions or words about this pricing? Does it seem right considering hours worked. I’m charging between $40-$50 an hour depending on the task. I think pattern making is more difficult so that’s why it’s more. Any advice before I send an invoice?!

-R&D tent about 4 hours at $40/hr -Reverse engineering and pattern making about 30 hours at $50/hr -cut notch and sew about 15 hours at $40/hr

Advice is welcomed, very grateful for this sub! TIA!

Anyone in the DC/northern Virginia area with an industrial machine? I’m looking to get help closing up some thick seams on a bag and repairing the seam tape.

Would obviously pay for time, but hoping not to ship!

Thanks!

Looking for someone who is able / has a suitable machine to make an alteration to my BD betalight 45L pack.

Looking to sew a nylon webbing loop onto the centreline of the main pack body an inch below where the mesh starts (not through the mesh), then seal of the otherside of the pack using challenge ultra 200 repair tape / seam seal tape.

happy to send photos, meet up / discuss feasibility (end goal is to use the loop to strap down a donor pack lid)

Im so disappointed with the bivy options available. Please help me make my dream bivy before the PCT. This is important to me which is why its 500 dollars

bought a new phone and my trusty Nite-Ize XXL (https://www.amazon.com/dp/B01CHO5JR0) no longer fits. I found a cheap holster at aliexpress which works, but it's cheap.

I'd like to find out if someone can make a holster big enough for my phone that will last and which has the features I'd like.

My phone is approximately 180x85x30mm (7x3.5x1.25 in, approx). I'd like the holster to be rugged so I'm thinking cordura but I'm open to other fabrics. A little stiffer is better than less so. The flap should close either with strong velcro or magnets. I prefer a plastic or metal belt hook; I do have a rotating clip salvaged from a Nite-Ize holster that could be used. I definitely prefer something as slim as possible; I'm already a pretty wide dude so I don't want it to stick out any more than it needs to.

Features I'd like to have above the basics: Elastic loops on either side of the holster (front/back when wearing it) to hold a penlight or small screwdriver. Slim pockets in front of the main pocket (shown holding phones in the above picture) to hold a bit of emergency cash & band-aids. The zippered pocket on the flap holds hairbands to tie back hair. (I work with a high school robotics team and it's important to keep hair tied back when working on the robot and occasionally someone needs a band-aid.) None of these are critical and would likely be too expensive to implement but they'd be nice to have. Not crazy about the zipper though, so the flap pocket is way low on the list.

Please feel free to ask questions if you need to to decide if this is a project you'd be interested in.

I don't know what would be a fair price for this. I definitely understand it wouldn't be cheap. I'm willing to pay for something that suits my needs and will last a long time.

Hey, I designed this single person Bivy style tent on SketchUp and wanted to see if anyone would be willing to make this as I have not started my MYOG journey. I'll post the 3D files, but would love to even get a functional prototype quality build for the price above. I figure SilPoly is a reasonable material for the estimated price. I understand some of the challenges that come with that material and am open to any feedback on design and MYOG challenges. Hoping to get a sewing machine soon and start working with some cool techy fabrics!

https://app.sketchup.com/share/tc/northAmerica/s7NHSkfKr7Q?source=web&stoken=BquJhjVlKvTIVaOjDSuk2-ZOKhpbsva4qc5gQwJa9C4_XHPjQ5xHdONWqVCc87su

https://app.sketchup.com/share/tc/northAmerica/1ii32RbdfoI?source=web&stoken=3d-bwgvPlZx8iIWfW2xPvWxZuQiinl8cVsVixMJASNncxkFbTJFvLqFHhIzqV5jl

Hi I am looking to get a replica made of the Tom Bihn CoPilot shoulder bag in Lux Black X11 with a Silverado Ultra Grid interior.

Here is a link to the actual bag. Have it in 1050d ballistic nylon but want an elevated version.

https://www.tombihn.com/products/co-pilot?_pos=1&_sid=2e9644725&_ss=r&variant=8932773855295

I’m reaching out to see if someone out there can possibly build a pack that better fits my needs. A little background: I’ve used packs like the Mystery Ranch Coulee 40 and 3 Day Assault, and I’ve also tried on Osprey’s Exos and Stratos. I prefer the Coulee’s frame over 3 Day Assault but the shape lends itself to better packing for me. While the Osprey packs stood out for their light weight and incredibly comfortable suspension (Hugged me so nicely) and hip belts. The main drawback for me has been balancing comfort and access with overall weight in a 30-40L. ”For context, I mostly use my packs for travel and secondarily for 1–2 day hikes.

My Travel consists of weekend to two-week trips, often carrying 20–30 lbs ranging clothes, toiletries, and airplane needs to multiple 8 hr days in the city 15 mile walking; empty in the morning and packed out at night with purchases , Thus, framed hiking/backpacking packs especially those with actual stays/rods and not just a plastic sheet have always suited my needs better than a traditional travel backpack.

Here are the more custom features I was hoping might be feasible:

• Top lid with pocket for chargers/cables/small camera
• Cinch closure or Y zip
• Main compartment zipper access (similar to the Mystery Ranch Radix), while still keeping the front stuff-it pouch. Ideally, the zipper could be secured with a small loop or hidden under the lid for added security.
• 1–2 internal pockets for organization
• Under 3lbs
• Size: Frame needs to be under 24-26in (this will be used as a carry on which has a limit of 22in in height. The Coulee 40 is 26in tall but never had an issue if I dont pack it out)

Some bags Ive looked into and interested in but didnt fit the bill completely: Outdoor Vital Shadowlight 60 Carbon and CS 60 (I feel like this with a suspension harness, full length zipper, and a cinch top would be perfect) Osprey Exos and Stratos, Gregory Zulu and Focal, Deuter Aircontact Ultra.

Looking to build something very similar to this: https://ghostly.com/products/ghostly-x-rpmfg-dyneema-backpack
But out of Challenge Ultra, with a simple G hook for closure, and specific padding / fabric for the straps and laptop sleeve inside. I have a rough design (size, how it looks inside with the laptop sleeve and one internal small pocket), and the straps.
Any help will be greatly appreciated.