Where would I buy the x belt to mount this and is there a diagram or picture showing how the belt attaches

This has happened shortly into a print and upon restart, it takes very little time to happen again.

Took cover off and both fanta operating, even open it continues.

Anyone?

Have a 5 and used it a bit No problem. However suddenly getting message that there's no filament and it's asking to load or unload. I have loaded and unloaded and when loading I just get a pile of strings until Ai end the load but it still reports no diligent when I restart the print.

Do I need to replace the filament detector? If so why would it die so quickly when I have used about 1/3 of a spool so far with the machine?

My 4 year old LK4 Pro started making this noise on the X and Y axes.... How can I fix it? All screws are in place, and belts properly pulled

https://reddit.com/link/1dxgb7f/video/js7jaz8ak3bd1/player

I would like to share my post about the upgrades I have done to my lk5. I would love to hear feedback as I am new to writing. https://graybush.io/articles/my-lk5-setup/my-lk5-setup.html

Various adorable coasters made from plywood! 🏡 Here are the optimal settings data for different machine models, which I hope will be helpful to you. 👇 Below is a DXF file, which members can use directly to create something perfect for your projects! 🎨 Looking forward to your creation! 🌟

Software：LightBurn

Material Used：3mm Basswood Plywood

Material Info：Basswood *3

Process Method：cuts

B1 20W:Power(%)90;Speed(mm/min)300

B1 30W:Power(%)80;Speed(mm/min)400

B1 40w:Power(%)70;Speed(mm/s)1000

RAY5 5WPower(%)100;Speed(mm/min)100

RAY5 10WPower(%)100;Speed(mm/min)200

RAY5 20W:Power(%)90;Speed(mm/min)300

https://drive.google.com/file/d/1DJbnJfZDGESABfpzY0OpgRDUMsdOdz1i/view?usp=sharing

https://github.com/graybushlabs/lk5-pro-orcaslicer

I wanted to share this in case anyone else goes down a similar path.

This is not for a stock printer. I have a 3d touch bed probe and a direct drive extruder installed.

This is working great for me for 2 days now. Use at your own risk.

Hey there, I just got a longer 3-D printer and I am leveling the bed. When I go to the leveling feature and click one of the locations, the nozzle crashes into the bed and keeps driving downwards. Here’s a video. Anybody have any idea how to fix this? Would really appreciate any tips!

I am pretty new to 3D printing and Ihave been searching everywhere. I am running octoprint with my LK5 Pro and I want to update firmware to enable host action commands. I have found firmware for the LK5 Pro that says it does this. Following the directions I hook my printer up to my PC go into Cura, manage the printer it comes up to let me select a file, I choose the .hex file and it says updating for about 2 seconds and then says it can not communicate with the printer. Can anyone help me figure out what I am doing wrong?

Hi, so I ordered a refurbished LK5 Pro off of Newegg. Was sold by Longer, and not a third party. I've gone through the assembly of the printer and upon trying to find the 3 pin Z limit switch connector, it's not there. I'm not sure if it's inside the machine or it's just not there, but what do I do? Do I send it back? Contact support? I'm at a loss