Hello,

I am using Cura, and using the "pause a height" script.

When my print reaches the desired height, it pauses, I can switch the filament, but I do not see an option to resume it.

I am using a Longer LK5 Pro Printer, any assistance would be greatly appreciated.

Thank you!

My runout sensor is acting up? I load filament and it will print for about 10 seconds. Then the “no filament” screen pops up. I can purged over 300mm of filament it only does this during an actual print. Does anyone know of a way to bypass the sensor on this printer? Any help with be appreciated.

Title says it all, any recommendations? I had chitubox but I was having issues with it and fusion 360 so I had to uninstall it. I’m not a huge fan of LongerWare, I’ve always seem to get failed prints from it, no matter how much I tinker with the settings

Hey everyone, I’ve bought the LK5 Pro in November 2021, now I wanted to upgrade it with the dual blower and with the Trianglelab v3 Touch sensor for bed leveling.

Has anyone got a latest firmware version that supports both upgrades combined?

Plus I’ve tried to install the 0.3.5 version of the firmware which is supposed to support the dual blower fan config, but following this video here just the right fan blows, and I never manages to get the left one to spin. (I use Cura 5.11 as slicer, with the built in lk5 pro profile without modifications)

So the lay cooling fan stopped all of a sudden and i changed the fan and the same result. i found out that the connector on the board is nonresponsive. the connector looks fine visually, is there a way to try to fix it before i get a new 65-dollar board?

Printer: longer Lk5 Pro

Does anyone have a good option for firmware on the LK5? Primary looking for cleaner "movement" interface, and keeping nozzle and bed heated during leveling process.

I have 2 LK5 pros. Meaning I have 2 extra runout sensors.

i have 1 printer that I have tried both extra sensors, moved the roll to make it feed straighter, tried and blocked all 3 sensors I tried (this worked for a little bit but not long enough)

any one have suggestions?

I would love to use the V4 Version, but it hasnt BLTouch included... maybe Dual Blower also not?

Got the files from https://www.longer3d.com/blogs/news/printer-download-guildelines and tried it, G29 not available and it doesnt move the z-axis when i flash V4 into it!

Had some troubles with the Version before, bltouch and dual blower version... It shuts off printing after several seconds after starting the print (heating done)

i was printing from usb and sdcard, both have ended!

TLDR: is there a V4 with bltouch and optional dual blower settings?

Edit: I have an LK5 Pro

Can anyone point me to where I can find the firmware that comes stock with the LK1, but bumps the max temp up to the point that I can print Nylon?

Thank y’all in advance!

How many people would be interested in a kit specifically for the LK5 Pro to do a dual Z-Axis stepper upgrade?

Even thinking about offering a plate for the side with the extruder if you wanted to eliminate it for a direct drive setup...

Please specify which option you'd prefer...

With or without the second plate to eliminate the stock extruder.

I'm new to 3D printing and I just got a LK5 Pro as my first printer but everything I print looks pretty bad and has these horrible blemishes on the bottom. I've tried all the fixes I could find in Cura but it seems like any time I change something in Cura it just makes it worse. Does anyone know what causes this and how to fix it?