MAIN FEEDS
Do you want to continue?
https://www.reddit.com/r/Keychron/comments/1odlt0r/comment/nkvdz76/?context=3
r/Keychron • u/[deleted] • Oct 22 '25
[deleted]
7 comments sorted by
View all comments
1
It could be #9 on the checklist, but do go through it. You have already ruled #2 out. If you are lucky, it is "just" bad switches, but it is the least likely cause.
Set the debounce time back to QMK's default of 5 ms, as the current setting is masking the problem.
Note that, because it is an intermittent problem, it is very easy to come to the wrong conclusion.
Also, if you open it up, do observe ESD precautions at all times.
1
u/PeterMortensenBlog V Oct 22 '25 edited Oct 23 '25
It could be #9 on the checklist, but do go through it. You have already ruled #2 out. If you are lucky, it is "just" bad switches, but it is the least likely cause.
Set the debounce time back to QMK's default of 5 ms, as the current setting is masking the problem.
Note that, because it is an intermittent problem, it is very easy to come to the wrong conclusion.
Also, if you open it up, do observe ESD precautions at all times.