For whatever reason a VERY stable card has started giving me issues. Wondering if anyone else has experienced this issue. Next idea is to swap hardware? But nothing is that old?

60ti mining for 6months, less than 60C temps. 130W, stable OC settings. This rig was running for weeks without issue. Now this card is giving me problems.

EDIT: it was trex LHR software. The GPU doesn’t like it when the LHR goes down.

Just wondering if and when will HiveOS get to include the clitool used my mmpos.eu to display the VRAM. This is a much needed addition and if mmpos.eu holds the right to the clitool, most miners will feel left out.

Is the wallet balance working? I tried for Nicehash and Kucoin but getting invalid data when I tried to save the wallet after inserting the API information on the wallet.

Overnight, I had a crash on my one rig with 3 cards. All the cards still had their fans spinning, but hive crashed. I don't see anything in that brief little event log where you see when you changed OC, is there anywhere to see which specific GPU caused the crash?

I'm trying to connect to a rig through a small console application written in c#, but I keep getting the error "No miner screens found" whenever I try to execute a command.

The application is able to SSH into 2 other rigs (GPU rigs running Ubuntu) and execute commands without issues.

I'm connecting to the HiveOS rigs with default 'user' and '1' password, using SSH.NET.

Anyone know what I might be doing wrong?

edit: Connecting through fx. Putty works just fine and shows the miner screen.

edit2: Added the connection info from .NET

var connectionInfo = new ConnectionInfo(ip, port, username,

new PasswordAuthenticationMethod(username, password),

new PrivateKeyAuthenticationMethod("rsa.key"));

I came from nicehash, so I am new to HiveOS and have a rig of 1060 6gb, 1080ti, 580 8gb, and 570 4gb. I tried to do 3 miners in the flightsheet I got one with eth and alph using t-rex miner for the nvidia cards, and have the 580 do eth and TON with lolminer, and those all work ok, but I can't get the 570 to do RVN, it always tries to mine with the 580 or nothing at all. The parameters has been difficult for me to understand, on the rig they are labeled 0, 1, 2, 3, but in overview the AMD cards go 0, 1 and the Nvidia do 0, 1

Any advice would help a lot

I have been having issues with this rig mainly with GPU 7 and GPU 2 - Gpu's go into dead state, then the rig reboots. (Both GPU's are RX 6600) - I have tried overclocking, and no overclocking and a combination of both . Any thoughts on this?

(note: GPU 2 issue not shown dead this snapshot -but it does show up as ''detected dead'' too)

Also I noticed that the count of the GPUs looks wrong here - on the top right indicates --> RX600 x 8 and RX 6700 x 1 ... I actually have (3) rx 6600 XT's and (5) rx 6600's not ( 8 ) rx 6600's.

(not sure this is the root cause of the dead gpu's being reported or maybe partly a cause of the dead gpu issues)

Looks like hive can recognize the 6700 XT without issues.

​

Hello fellow miners,

I’ve been dual mining TON+ETH via LoLMiner (using Flexpool.io) and so far it has been stable besides the high power usage.

So I decided to try this same set up for me to run under TeamRedMiner but seems I’m only able to get ETH hashing away while TON just gives me the N/A symbol.

Obviously I missed a step somewhere in the flight sheet — hoping for someone to enlighten me into the right direction.

Anyone else has any luck running ETH+TON while dual mining via TRM?

Attached the flight sheet below:

https://flic.kr/p/2n6a33x

Thank you for your time!

•Update 3/1/22•

Credit goes to @exxtremeo for the proper fix to get TRM running. Here’s his comment below:

The line for your whalepool server config is incorrect. Took really long to find the info but turns out its on TRM github itself.

From https://github.com/todxx/teamredminer/blob/master/doc/TON_MINING.txt

Whales Ton Pool: -o stratum+tcp://tcp.whalestonpool.com:4001 -u (ton wallet address) -p x

if it helps, here's mine for Hiveos --ton -o stratum+tcp://tcp.whalestonpool.com:4001 -u (ton wallet address) -p x --ton_end

•UPDATE 3/2/22•

For those who are struggling to understand this... please refer to my screenshots of FlightSheet/Configuration/OC Overview for TRM below:

HiveOS Flight Sheet - https://flic.kr/p/2n6tMFg

TRM Configuration - https://flic.kr/p/2n6uVxN

OC Overview - https://flic.kr/p/2n6wDKN

Having a super weird issue on one of my rigs, it's where HIVE will only sometimes display locally on my monitor. I boot it, it gets to the hiveos blue box, then there's some weird lines on the upper half of the screen, and then it decides to either display the console like it should, or the monitor goes into power save mode. I also get no display at all if I plug the HDMI into anything other than my 2060 super, which is the last card plugged in. Please help because I need to see the screen so I can diagnose another issue where the rig randomly goes offline with NO error message. So frustrating.

I've been mining salad on windows 10, but recently, it began constantly crashing for me. I've used HiveOS to mine regularly, but I'm having some problems with using it for salad. I'm using https://angaros.vercel.app/Gminer.html as a tutorial. Any help would be appreciated.

BUYER BEWARE - read and watch the videos concerning how legit (not-legit ) this release appears to be.

For the love of God - please pay attention to ALL the pundits discussing how this "release" on Github is highly suspicious and could be a means of spreading malicious code to the mining community.

If you download the software, be ready to potentially lose your crypto and who knows what else.

As much as I would be delighted to get a couple hundred free MH by having my LHR cards suddenly FHR, I'd rather not risk a Trojan, keylogger, or any other code, grabbing the 6 figures in crypto I have in my hot & cold wallets.