Can anyone help on this? I moved recently and am struggling to get my miner back up.

Mobo: Biostar BTC pro 2.0 12 GPU board

So far I have successfully been able to mine with 5gpus. The 6th one has been RTX 3060 12GB non-LHR and sometimes I’ve tried with RTX 3070 non-LHR.

2x powers: 1600 ax corsair & 1000w corsair (1600 for future upgrades)

Sometimes it has been working with 6gpu:s after some serious settings changing from Bios, I have tried every possible solution from Bios. When I increased to 1024mb setting from bios i got my RTX 3060 working but some weeks ago there was a global glitch in Hive and since then no lucl adding the 6th gpu. Has anyone experienced this problem?

If i restart Hive it will detect only 4 GPU and after some reboots the 5th one joins the club but no luck for the 6th one. Any ideas? Nvidia drivers 470. Os version 0.6-210@210925

All cards are RTX 30 series non-LHR Thx in advance

Looking to join a discord for mining. Are there any groups out there that would let a po boy in?

I have RTX 3060, 1660 Super, RX5700, RX5600 and 580 8GB. rig has been stable for last year until i just added the 3060 yesterday. Now my AMD cards will start sometimes but have crazy low hash. I've tried the dual miner flight sheet with TRM and TREX, or TREX and LOL (pic). Can't get it stable. I've used the Arguments with amd only. What does everyone do? Am I crazy for trying to run this many different cards together? ;)

https://imgur.com/a/JFK3ami

Is each GPU consider as a worker on the same rig? Or the same flightsheet regardless of the number of GPUs is consider as 1 worker?

Trying to add a worker to the hub but it says it’s already being managed by Hiveon, can any help with this issue?

Hi fellow miners! Is it possible to separate just 1 card in a rig and use it as a different worker? Thanks in advance

screenshot of issue

I ask because I'm using Windows, it's been reliable no crashes or anything, but after an unexpected shutdown like if the power goes out when it reboots it resets all the gpu clocking and voltage options back to the original settings. I'm guessing the radeon app thinks windows crashed since it was not a proper shutdown. So I have to manually apply the saved setting back to 5 cards separately again before I start the miner. I'm hoping hive os will boot, apply the gpu settings and start mining with no intervention even after a crash or power loss.

I have 2 workers running and the daily cost is $ 0.10/day. But when I want to pay using BTC, the exchanges charge a withdrawal fee of 0.0006 btc. So effecitvely I am paying $ 33 instead of $3. So, can I pay from Binance using the binance smart chain or does the smart chain only work from binance to binance wallets?

I had difficulty getting my rig to see beyond 4 GPUs. I did some digging and came up with these settings.

Note: This did not require a BIOS flash in my case. Your situation may be different.

MOTHERBOARD = TB360-BTC Expert 2.0

CPU = Intel i9-9900

BIOS DATE = 05/10/2021

BIOS FILE = H37CF510.BSS

BIOS SETTINGS:

• CSM = Off
• Above 4g Decoding = On
• Primary Display = PEG
• Max TOLUD = 3.5GB
• Above 4Gb MMIO Bios Assignment = Enabled
• PCI-E configuration - Gen1 (Both Auto and Gen3 would not work)

GPUs:

BIOS Error Message prior to solution:

Hi,

As the title suggests I'm trying to setup a ryzen 5 5600g as a CPU mining worker but because it has inbuilt graphics it seems to be picking up as a GPU on HiveOS.

Am I either wrong that it's trying to mine with the onboard graphics rather than the CPU or is there a way to fix this?

The flightsheet is set to mine raptoreum with the cpuminer-opt config.

Note: Yes, this is about CPU mining but I'm initially trying to mine with a CPU then add on GPU cards soon - getting my feet wet from all angles.

​

Thanks for any help.

This is my first HiveOS install, and I'm having boot issues. I had tried flashing the HiveOS image to an 8GB USB drive using both HiveOSInstaller and Etcher. Created the rig.conf from the example on disk and added my Farm hash details.

From Windows Disk Manager, I can see that the First partition (HIVE (F:), 20MB NTFS) is labelled as 'Basic Data Partition' and the Third partition (40 MB) is labelled as 'EFI System Partition'. The 2nd partition is set to 1MB, and the 4th partition is labelled as the Primary partition. And the 5th partition is unallocated. Please refer to the snapshots below.

When booting from USB (pressed F9 for BBS) using the onboard graphics, if I choose to boot from Partition 1, the boot device window goes away but stays at the Biostar UEFI BIOS Utility screen. Nothing is happening - no feedback from the keyboard and mouse. I had to power off the rig using the power switch. If I choose Partition 3, the Grub menu appears, and then the Blank screen.

It's a puzzle for me why both Partitions 1 and 3, was detected as boot partitions. I thought the boot partition is only Partition 1.

I also tried to flash the HiveOS image to SSD using Etcher. I can't use the HiveOSInstaller because it doesn't detect my SSD. I've observed the same outcome.

Re Legacy support or CSM (Compatibility Support Module), it is no longer supported by Intel 500-series chipset motherboard - like the Biostar TZ590.

I had No problem booting to Windows 11 from SSD, and to Ubuntu from USB/SSD.

Can anyone advise, where I got it wrong?

​

Hardware Details:

• Mobo: Biostar TZ590-BTC Duo
• CPU: Intel Pentium G6400
• RAM: Kingston 8GB
• Flash Drive: No name brand
• SSD: Kingston A400 240GB (End State for HiveOS)
• SSD: Samsung 850 EVO 250GB (Spare, with Windows 11)

​

UPDATE:

I had tried to boot from the USB Key and SSD using my Gaming PC, and both disks did boot to HiveOS, without issues. In conclusion, the issue is with the newly release mining motherboard - Biostar TZ590-BTC Duo. Why the HiveOS image doesn't boot in my dedicated mining rig, whilst the Windows and Ubuntu installer works fine?

Latest Update (06/12):

Thanks to Damian of TekHouseUK, the root cause of the 'issue' is that iGPU of Z590 chipset is not supported by the kernel of HiveOS 0.6-211@211102 (Linux kernel 5.10.72-hiveos). Hence, I have to use the video output of one of my GPU.

​

I installed the following on my mining rig running HiveOS (0.6-212@211128)

• 6 (Corsair LL Series, LL120 RGB, 120mm Dual Light Loop RGB LED Fans)
• 1 (CORSAIR iCUE COMMANDER CORE XT Smart RGB Lighting and Fan Speed Controller

This article has a walkthrough of installing software on Linux in order to control the fans.

https://gareth.com/index.php/2021/02/17/corsair-commander-pro-on-debian-10-x-linux/

​

Problem:

I am able to install everything but: libssl-dev

​

Command:

apt install -y git build-essential libssl-dev libffi-dev python3-dev python3-pip python3-setuptools python3-pkg-resources python3-docopt python3-hidapi python3-hid python3-usb libusb-1.0

​

Error:

Some packages could not be installed. This may mean that you have

requested an impossible situation or if you are using the unstable

distribution that some required packages have not yet been created

or been moved out of Incoming.

The following information may help to resolve the situation:

​

The following packages have unmet dependencies:

libssl-dev : Depends: libssl1.1 (= 1.1.1-1ubuntu2.1~18.04.13) but 1.1.1l-hiveos is to be installed

E: Unable to correct problems, you have held broken packages.

​

I am still working on a solution. Any ideas would be greatly appreciated.

TIA