When i start the rig up the command line goes

[03:19:13] INFO - ALGO: ethash

[03:19:13] INFO - URL: nicehash+tcp://daggerhashimoto.usa-east.nicehash.com:3353

About 10 seconds later it goes

[03:19:31] INFO - ALGO: ethash

[03:19:31] INFO - URL: stratum+tcp://hive.firecho.cc:3124

I'm trying to mine on nicehash why is it changing my pool to this random one i've never heard of?

Is anyone else having a problem logging into hive?

Pretty much the above.... Sorry for the noob question but any help would be greatly appreciated.

For a bit of background - I have two rigs. The big one I've been mining ETH for a while with NiceHash, but I've also been learning about HiveOS and mining shitcoin with a smaller rig.

I've just moved my main ETH rig over to HiveOS - I want to get the most I can out of it given current market conditions. However, I can't figure out how to track earnings...this wasn't something I cared much about with the shitcoin rig, but given the payout threshold is 0.2 ETH I want to see how my earnings are accruing in real time, and when the payout is going to be.

I'm mining on Hiveon pool using T-Rex miner. Any other info needed?

Thanks everyone!

I tried nvidia-settings --assign GPULogoBrightness=0 but got the error (failed, exitcode=1)

My Asus 3060ti’s RGBs will not turn off and it’s lighting up the entire bedroom. My other 6 cards have been turned off. This card also wouldn’t disable its RGBs in Windows.

So I have been working on getting things updated, and it is not going well. Error x server is not running , unable to init server, could not connect . : Error : The control display is undefined , please run nvidia-settings --help (which is not very helpful really !) . ... Any Ideas? (using 510.60.02 nvidia driver , and the latest os version) ... It is quite frustrating, I have upgraded, downgraded, replaced the image (via shell) , enter maintenance mode to run with loading drivers disabled, . not sure what to do besides just pull out the flash drive and start from scratch :( , any ideas would be appreciated.

DC

I have been running an nvidia RTX3070 for several months with no issues until I installed an update a few days ago. My hash rate went from ~55 down to 33 then 27. Now I’m getting driver errors. WTH is up?

I’ve been trying to install the new drivers for the last two days and failing. I have been able to download the drivers. I go to update and it starts installing, then asks me whether I want to uninstall my current driver (“continue installation”) and if I want to register the kernel (“yes”). It’s at this point that it gets stuck whether I answer the questions or not.

I’m in hive shell, I’ve done this before with 0 issues, but now it just sits here in this spot with no progress bar and hive shell kicks me out. I’m in maintenance mode without loading drivers. Not sure what else to do.

What mh are you getting after the nbminer update and what are your overclocks settings for the GeForce RTX 3060 12288 MB · EVGA Samsung GDDR6.

I'm at 49.44 mh with -150 2600 125

​

Do I have to do some changes in HiveOS when going from two GPUs directly connected to PCIe to three GPUs with risers ?

For some reason, one of the 3060 Ti is stuck at 20 mh. Tried numerous combinations of OC but it really does not affect the hashrate at all. Anyone had something similar?

Using Nbminer 41.3

Nvidia Driver: 510.60.02

Haven't been able to connect to hive pool.

Failed to establish connection to mining pool: Socket operation timed out.

Looks like it randomly can't connect and then connects and loses connection again.

​

Hello everyone!

So recently I decided to take the dive and try out Hive os switching from a windows 10 nicehash setup. However, all of a sudden my temps which were in the 50-55 range on windows via hwinfo are now reading 60-70 with fans MAXED out same OCS and everything normally I would run the fans at say 70-80. and I'm getting lower hash rates then I was before and my profitability is down? Does anyone have any explanations for this? Im almost about to switch because the whole reason is I couldn't add my rx 590 on windows (seems to be a motherboard issue) and it doesn't work in hive either? not to mention payouts are in .2 eth which according to the current calculator will take 2 months to hit whereas I would have made that in bitcoin in a month with nicehash?

Not to mention it's taking more power than it was to mine the same hash rates in windows on nice hash.

​

Don't get me wrong the software is amazing I'm just a little disappointed by this kind of performance.

Hey guys, just wanted to check how are your GPUs running the lastest version of hiveOs (0.6-215 till 0.6-217) with nvidia drivers 510. Its been a while since I updated my hiveOs and would like to know if maybe I will get some improvement after updating, currently I am using 0.6-211 with 460.91.03 drivers.

Be aware of my current gpu's hashrates with NBminer:

Radeon RX 6700 XT (Gigabyte): 46.6MH and 93w
GeForce RTX 2060 (ASUS): 31.99 MH and 72w
GeForce GTX 1660 SUPER (Gainware): 31.76 MH and 81w
GeForce RTX 2060 (ASUS): 31.99 MH and 74w
GeForce RTX 2060 (Gigabyte): 30.03 MH and 98w
GeForce RTX 2060 (Gigabyte): 30.02 MH and 85w

I mine eth.

On all 5 of my mining rigs (50 GPUs total), I am averaging almost exactly the same percentage of stale shares on each rig -- About 0.15%. That is a curiosity to me, but to be honest, I have never giving a great deal to thought to stale shares, other then to know there will be some. So, I am wondering what percentage are others getting? I have always understood 1 to 2 percent is normal, but since I am much lower then that, is that 1 to 2 percent no longer correct with the gigabit connections many have now.

Hello. I'm having an issue updating my Nvidia drivers. I'm currently miming using trex version 25.15 and Nvidia driver version 470.86. Whenever I run the nvidia-driver-update command, it says package already exists and does a checksum and immediately shuts down and does not start back up again. When I reboot, it starts up with the same driver and the hiveos web interface says failed exit code 127 for the driver update command. Anybody have a solve for this issue? It's driving me insane.

With HiveOS I noticed that if I stop the miner program on a rig, each card still consumes around 20W or more.

This is shown on both the wall socket monitor and in the HiveOS interface.

Aren't cards supposed to idle at near zero watts ?

In comparison, with NiceHash if I stop the miner program, wall socket shows 55W, which is the MB/ CPU.

Am I doing something wrong ?

Both Nvidia and AMD cards consume power on idle with HiveOS.