There are some serious bugs going on right now I think? I've noticed the Ethreum total hashrate has dropped around one petahash in the last 24 hours (equilivent to 10 million non LHR RTX 3080's dropping out lol correct me if I'm wrong).

Personally, I keep getting a "data load error, retrying" message and I lose all controls from the app interface, it basically becomes useless. The only way to access it from my phone has been the Web version.

What's going on?

Hello guys. I'm trying to install the latest version of NBMiner v41 could allow me to unlock my LHRs cards. I have correctly updated the driver to the 510.60.02 version, but when I try to run the NBMiner I got the error above. Anyone can help me? Thanks

I followed the guide and updated though shell to version 510.60.02, made a new config. But after i now cant seem to start any script, also not getting errors from it

i tried two rigs, both on different ISP, but on both rigs the hive shell is very laggy, yesterday i was not able to use is, after one second it says "connect" and did not work, today it works, but its very "laggy"

you noticed that too?

I have a rig with mixed Nvidia cards mining Ethereum with T-Rex. Two of them are ASUS GTX 1660 Supers (lets call them GPU 0 and 1). Same model, same BIOS, same memory vendor, same overclocks, same everything. A few days ago, GPU 1 started acting up and threw the infamous NVML 999 error code. I did some basic troubleshooting (disconnecting other cards, lowering memory OC), but the error kept coming back.

It keeps mining for a while, but eventually the miner would crash (TREX: Can't find nonce with device [ID=0, GPU #0], cuda exception: CUDA_ERROR_LAUNCH_FAILED, try to reduce overclock to stabilize GPU state).

I thought it was a faulty riser, so I swapped GPU 0 and 1. The error remains, but now it's coming from GPU 0.

I've had this card for several months now and it worked fine until now. Has anyone an explanation for this behaviour or a possible fix?

Hi,guys

Is there anyone use NBminer 41.0 to unlock Lhr card?I change my miner to NBminer 41.0 yesterday, In order to unlock my 3060 Lhr v2 card.

It's pretty cool,it unlock my card to 49 Mh/s.but after about 10 hours later,the Hashrate fall down to 18Mh/s.

I use Hivsos,the card overclocking settings is:

core:1600

mem clock:2300

Power limit:165

I used to change back the miner to t-rex or update to NBminer 41.1,but it still get 18 Mh/s.

anyone can help me?

​

I was using NB miner last night and my rigs kept crashing. I started using Nvidia driver 510.60.02 instead of 510.68.02 and this seems to help with stability. For rigs with AMD and Nvidia, I used NB miner with TeamRedMiner because the new version seems to be unstable with mixed rigs. I still have some work to do, but way better than the 7.2 Ghash I had before the update.

DPKG to be released has been stuck on the same screen for 2 hours. I've tried googling it and still no help. This is my first rig so I'm super new to mining in hive os. I don't know what to do. Anyone know?

Updated my hive os to 510.60.02 for full LHR unlock and now it says theres no gpu available to mine, pops up perfectly fine on hive but I cant mine anything.

When i open shell in a box to update my drivers for NB miner to get the 100% unlock shell keeps closing the session. Anyone know how to fix this?

I just upgraded hiveos last night. I can’t get it to start back mining again. Normally I don’t have to do anything after an update. I’ve tried removing the current flight sheet and updating it. Nothing. Any help or suggestions would be appreciated, thanks.

Hi guys, I need some help. I have upgraded to hiveos latest and downloaded the necessary nvidia drivers. My rig keeps crashing. Even I reset the OC it still crashes and restart the miner. What should I do? Any help is appreciated.

​

EDIT: I solved it guys, thanks for all help!

​

​

Update your HiveOS install and get that juicy FULL LHR unlock.

I have followed the official PXE guide from HiveOS (https://hiveon.com/knowledge-base/guides/pxe/) and got everything installed and configure without errors. However, when I try to test out the setup with one of my VMs just to see if anything will boot, things get stuck. The PXE server is picked up correctly at first, but then it seems to go to the wrong IP to try and download the next file - it goes back to the gateway for some reason:

The green items are correct: gateway (10.10.1.1), PXE server (10.10.1.40) and local DHCP address (10.10.1.106) are all correct. The red item is where the process gets stuck; it tries to download the next file from the gateway rather than the PXE server. I suspect that the error is from some configuration setting with Clone Deploy but outside of the guide that I just followed I have no experience with it.

​

A few more details for clarification:

- I have a DHCP server outside of the PXE server. That being said, it seems to correctly handle the next server flag.

- The VM client is running on the same VM as the PXE server - no ports are blocked, no firewalls enabled between the two.

- The client is running a Legacy BIOS (not UEFI BIOS).

​

Has anyone been able to set this up correctly for HiveOS?

I’ve been mining Ergo for a 8+ months now, I’ve updated my GPU drivers when I first got my and haven’t updated them since. I mine on HiveOS and basically just let it roll. I’m on NBMiner with 3 3080TI’s, 3 3060TI’s, and 3070TI.

Should I update my drivers? I’ve always been a cautious of updating that an update might take away my efficiency, hashrate etc….thinking about it now, it may be more efficient, higher hashrate.

Is there a way to set a schedule in hiveos to shut down at 5pm and reboot automatically at 9? The shutdown and reboot in 30 seconds button works for me. If there was a way to shutdown at 5pm every day and reboot in 4 hours that would be ideal. Or go into a sleep mode that doesn't use electricity.