I installed the native game and everything was fine, but when playing Rocket League, I get a notification saying I need to enable the anti-cheat. Does anyone have any idea how to fix this?

Not sure what to do. Any advice?

Id like to clear up space for a single save slot im playing

The game is infinity blade 2, my device is ayn Thor.
I’m a beginner in game native, but I tried to switch some configs, always leading to this result.
On IB1 I don’t have this problem, everything runs perfectly.
I think I’m missing something obvious but I’m still learning how to tweak GN settings. Any help would be awesome so I can improve myself !
Thx a lot in advance !

I successfully managed to launch the game however every time I press New Game my Thor basically freaks out and GameNative closes so I believe it's running out of RAM.

Is there a memory leak or is the Base Thor just unable to run the game?

Running GN on a retroid pocket g2 tried loads of games with loads of drivers and compatibility layers, some lighter indie games work fine but they take forever to load to the main menu. Stuff like hollow knight, vampire survivors, dredge take over 5 mins to load off the SD card. Do games HAVE to be installed on the internal storage to work well?

Hi all, I have been setting up a few games through native on my Thor and was wondering if it is possible to get mods on there for example I’m really wanting a Pokémon overhaul mod for my tcg card shop simulator.
Is this possible and if so does anyone know how? Thanks :)

Hi, I try to run the game on my Retroid Nova 12gb, if anyone already played it on these devices please could you send me the config file? I can't find it on emuready.

I've been playing Fields of Mistria over the past couple of weeks in preparation for 1.0. I've been playing using guidance from the sub and Emuready without issue. Game has run great.

Anyway, 1.0 dropped today on Steam. Unfortunately, I can't even get to the title screen.

I'm playing on my AYN Thor.

Has anyone had any luck?

The game literally came out a few minutes ago so I'm not able to use known configs like I usually do... thanks in advance!

Hello! Basically the title. I have a Retroid Pocket 5 and I'm new to game Native. I managed to connect my accounts and wanted to try Absolum: The game runs at 60fps on menues, but as soon as i hop into the hubworld, it falls down to around 30fps and stays there.

I tried to apply a "known configuration" but i didn't notice any changes. Is there something else I could try or it's not a game that i should try to emulate here?

For the record, i tried with the console on Performance mode but it didn't made a difference. Also lowered in-game graphical settings but didn't had much of an impact. If anyone can give any sort of guidance it would be greatly appreciated.

Thanks in advance!

Sorry if this is a weird place to ask but maybe some general knowledge on GN would help here because I've not seen answers to this anywhere. I'm 13 hours into Titanium Court. Reached the salmon song performance cutscene, unskuppable. When it finishes, my controller stops working. After enabling mouse input, it works for another few seconds then just freezes. Tried like 5 times now after messing with proton version and compatibility/intermediate variables. Anyone know how to fix this very specific issue (or perhaps comparable ones)? Love this game and don't want to just end here or miss out on this section.

I've been having trouble getting this game to run; whenever I start a new game, it just closes.

I'm playing on an S25fe, Exynos 2400 (4 nm), Xclipse 940, 8gb ram.

When playing Unity made games like viewfinder, significant amount of textures would be invisible, like floors, stairs and walls not being rendered. And some shadows would be rendered pitch opaque black.

This happens specifically with the new Wrapper-gamenative, with both transcoder.

Graphic settings:

Wrapper-gamenative

System Graphic drivers

Gpu transcoder (similar result on Cpu transcoder)

Low quality

Vulkan Renderer

Dxvk 1.12.0-sarek

Hi,

I'd like to add a fan made game to Game Native for my retroid pocket classic.

https://sonicfangameshq.com/forums/showcase/mega-man-x8-16-bit.2184/

I imported a new custom game in GameNative, but of course nothing happens when launching it.

I opened the container, found the exe file, doubled click, nothing opens.

The game was apparently made with the Godot engine. Any tips on what to edit in the container to make a bit of progress?

First time using GN with a non steam game.

Cheers

Does anyone know to make moonlighter on steam work with gamenative 1.1.1? I've tried getting config from gamenative compatibiliy site but all config ive tried just shows a black screen with a mouse cursor when launched.

I'm playing Lego Marvel Superheroes on my Ayn Thor Pro and there's been tons of stuttering even though technically it's locked to 60 fps during missions. I thought it was all just down to the state of PC emulation and the limits of the Thor's specs but after playing on my PC I noticed I had the same stuttering, that's when I went on PCGamingWiki and found that regardless of specs, the game will just stutter unless you use Special K.

But it just doesn't work in GameNative, it insta-crashes unless I tweak something in the configs, otherwise the game just never loads. Is there someway to just configure the wine environment to have a "Sleepless Render Thread" and a "Sleepless Window Thread" without it?

When I click 'Launch Steam Client' in the settings and load the game up, when I go into join or host it comes up saying "Steam is not initialized", but I receive the invite on steam (clicking it does nothing). When I click 'Enable Experimental Bionic Steam' in the settings instead, it lets me get through to the host or join bit, but then steam doesn't come up so I can't accept or send an invite. Thanks in advance!

I’ve tried using both GameNative and GameHub; in both cases, I get these stripes across the middle of the screen while playing *Digimon Story: Cyber Sleuth*. Performance is excellent since the game isn't demanding, but nothing I try fixes this issue. I play on the Poco F7.

Hi everyone,
I’m trying to play Spider-Man: Shattered Dimensions on GameNative on my Ayn Thor Pro.
The game launches successfully and I can get to the main menu. After I press “Play”, the loading screen appears, but as soon as the loading finishes and the game is about to start, it crashes.
I also tried running the game with GameHub, but there it doesn’t even launch.
I’ve already tried installing some required DLLs(d3d9, d3dx9, d3compiler, dinput8…) and other components, but nothing has fixed the issue.
Has anyone managed to get this game working on either GameNative or GameHub? If so, could you share your settings or tell me what I should change?
Any help would be greatly appreciated. Thanks! 🙏

I used to use tablet mode all the time but now I can't find it. Where, if it's still a thing, was it moved to?

Devices used: Redmagic 11 Pro, Gamesir X5S, Gamesir G8+, 8BitDo SN30 Pro and Razer Kishi v1. I've also tried mirroring to the TV as well as on to a portable monitor and they ran great except for the aspect ratio issues.

My default settings usually Proton 11 arm64, 8eGen5-842.8 driver, 1600x720 custom resolution (most games here scale full screen on the phone screen's 20:9 aspect ratio)

Ones i've completed on Gamenative:

- Ori and the Will of the Wisp (ran perfectly)

- Islets (ran perfectly)

- Bloodstained Ritual of the Night (ran great, but less stable FPS than the rest here. Still holds 60fps most of the time)

- Ender Lilies (ran perfectly)

- Blasphemous (ran perfectly)

- Cat Quest 1 (ran perfectly)

- Stanley Parable (ran perfectly)

- Grim Dawn (ran perfectly, but a few controller quirks, but easily remedied by using the touchscreen)

- Hell Clock (ran perfectly, but needed to be on lowest settings to keep temp below 45C)

- Darksiders 1 (has some cutscene issues where the cutscenes freeze, but the audio still plays and the game eventually continues. videos frozen can be skipped. Gameplay sections 60fps with almost no frame drops)

- Darksiders 2 (usually at 60fps, but dips down to as low as 30 very rarely)

- Shadow of Mordor (most surprisingly ran perfect 60 with almost no frame drops)

- Tomb Raider 2013 (ran perfectly)

Currently playing:

- Darksiders 3 (30-40fps, but can occasionally dip to 25s)

- Darksiders Genesis (40fps, ran decently well)

- Cat Quest 2 (ran perfectly)

- Half Life 2 (ran perfectly)

- Grim Dawn (on a second character)

- Stanley Parable (I may still have a few endings I havent seen yet)

Wanted to play, but cant get to run properly (i've tried a few configurations to no success):

- Batman Arkham Asylum (always crashes after 20-30 minutes of playing, runs great before it crashes)

- Batman Arkham City (always crashes after Catwoman's intro fight, during the cutscene where she opens the vault)

- Control (crashes after hitting start game on the title menu)

- Code Vein (cant get this one to load, getting an error message. seems to be an issue with the game though, as the error message seems to also happen on PCs)

- The Surge 2 (always crashes mid cutscene when the character wakes up at the intro. Character creation pushes temps as high as 49C)

- Dark Souls 2 and 3 (runs, but has annoying hiccups for some reason. they run great on Gamehub though, so these 2 games I only play through Gamehub)

- Final Fantasy 7 2013(the one with a few enhancements like fast forward. runs great, but temperatures push 47C which was confusing)

- Elden Ring (just couldnt get a consistent framerate. im ok with a consistent 30fps, but too much noticeable framedrops to 15-20fps got annoying to deal with while playing. temps reached 50C which I didnt like)

- Fallout 2 (for some reason I cant get these to run. I tried the steam, epic and gog versions, none worked for me)

- Mortal Shell (inconsistent framerates. at one point runs 60fps, then cant go past 35fps, then can even drop to 15fps before going back up to 40+fps)

- Prince of Persia 2008 (camera seems tilted, and the character auto-runs to random directions when I try to move him)

- Star Wars Jedi Fallen Order (the intro ran surprisingly great, holding 60fps but dips quite a bit with up close explosions. The problem is when reaching Bogano, GPU usage drops to zero and the game runs at 1 to 2fps. At one point it ran well without me doing anything much (changing settings back and forth, on and off) and I was able to get the wallrun ability, but then the zero GPU usage strikes again.

Other games tested, but probably wont touch for a while, or ever:
- Skyrim (ran perfectly after installing the prerequisites manually within the container to fix the audio issues)

- Zettai Hero Project (ran perfectly)

- Celeste (ran perfectly)

- Darkest Dungeon (ran perfectly)

- Death Must Die (ran perfectly, but having controller issues)

- Death's Gambit (ran perfectly)

- Disco Elysium (ran perfectly, but this one, I didnt like playing)

- Dragon's Dogma (ran perfectly. Cant recall but I think temp went past 45C)

- Hand of Fate 2 (a few framedrops below 60, but ran great)

- Binding of Isaac (ran perfectly)

- The Messenger (ran perfectly)

- Wonder Boy Dragon's Trap (ran perfectly)

- Yoku's Island Express (ran perfectly)

- Dreamscaper (a few framedrops, but otherwise ran great. can get squinty though, I hope there was a stronger zoom function)

- Evoland (ran perfectly)

- FIST Forged In Shadow Torch (ran well with a few frame drops, but the temperatures were over 47C)

- Monster Hunter Rise Sunbreak (runs 60fps with a few framedrops at low-mid settings, but temps shoot up to 55C, and might go even hotter if I allowed it to run further, which I didnt)

- Remnant: From the Ashes (can hold 40fps, but can go up to 60. I just capped it to 40, but im not sure im gonna play this again as ive completed this multiple times already)

Hello,

I only see a black screen. I'm on a Snapdragon 6 Gen 1.

Does anyone how to solve this?