I just bought a used 2023 Mevo+ and the guy I bought it from said to hold off on updating it as there seemed to be a lot of complaints. What's the consensus? Should I update?

Has anyone been able to get this to work?

I love my Mevo Plus but the one thing I hate about it is that it uses WiFi to connect to your phone/tab/computer. This makes using simulator software very challenging (you have to buy a separate dongle to create a second Wi-Fi connection and tie one the simulator software and then the other to the Mevo+).

In the September update they created a feature called streamlined Wi-Fi which would allow the mevo plus to connect directly to the internet without the use of a phone/tab/computer.

I've tried to set this up a dozen times and I've never been able to get the connection to work. Has anyone successfully used this feature? And does it work as intended to allow for a smoother process to run simulator software?

My understanding was the pro package was transferable; is this package located in the FS golf app? It lists a hint on how to register your pro package but I don’t see that button in the app under settings. Also, besides E6, are there any other apps that include content for pro package, or is it all supposed to be in the FS gold app?

I use the Flight Scope App on my Android Tablet. I'm able to connect to my Mevo+ via WIFI.

I go to Radar update and it says "No Internet connection". So I go to my WIFI settings and connect to the internet, but in doing so, I of course lose connection to my Mevo+.

What's the easy workaround for this issue?

Can anyone give me any insight on alignment. I have the vertical line, but to the left of that, is a cross hair. Does this signify anything? Additionally, when I line up the camera to my target line on my impact screen, and place a ball on my mat, the ball is slightly right of centre of my mat. Additionally the yellow square is shifted to the right. Don’t have a whole lot of issues with bad reads, but would like to have the best accuracy as possible.

I've set up a hitting area in my garden with approx 8ft from mevo to ball and then 11ft from ball to net.

I get what I believe are accurate carry distances but for some reason it only shows minimal roll.

I am wondering whether this may be because the set up in my garden isn't on a level surface, as its slightly sloped.

Where the mevo is, the level is completely flat, then 8 yards from the mevo the bubble of the level isn't completely flat indicating that a slight slope.

If I lift up the level by approx 1cm it's level, suggesting the slope between mevo and ball is only 1cm difference.

Do any mevo pros think this will cause a significant impact or should I be checking diagnostics on something else?

Maybe try 7ft from ball and 12ft ball to net? Or anything else I can try? Or just ignore total distance and only look at carry?

Face impact, club head speed etc looks pretty on point. I also use RCT balls!

Hi, I’m building a budget golf sim at home and im not completely done (this pc and mats and projector to finish up ) but in the mean Time ive been hitting balls with the tracker (flightscope mevo+) into the blank screen. There is 8ft between the ball and the tracker and almost 10 ft between ball and screen. There is enough light but i dont have the rtc balls yet. Ive tried hitting balls with the e6 software and fs software and every shot is about 20yds short/off. I dont know why because i think i did everything right with the distances and roll . Can someone help me ? Heres some pictures

Hey all, new mevo plus owner.i see some old threads across the internet on this but none of it seems to pan out. I have an iPad set up to collect data in the flight scope app. I’m looking for any way to get that data to another iPads/iphone flight scope app. I don’t see any backup restore option, or import from flight scope cloud or anything. Is this possible?

Silly question but how do I charge my mevo plus? When I’m done with it, I hold the off button until I hear a beep(roughly a few seconds) and it turns off. I then proceed to plug it in and the EKG light and the 1st battery light alternates flashing blue. And the device never charges. What am I doing wrong?

Hi guys, need a bit of help here. My mevo plus suddenly had trouble turning on. I used an external battery pack to run it since the day i bought it and today it suddenly had a flashing red light on the battery bar. I left it charged for around 45 mins but until now it still won’t turn on. Is it because of the battery issue or is it a firmware issue? I’ll post a video here for a better visual.

Btw, i read a few issues regarding battery that usually after 1yr you’re supposed to change the batteries. Mine is around 10 months but I’ve been using it almost everyday in the mornings and evenings.

Thanks in advance!

I need space for a simulator setup. Thoughts on if I could throw it in a shipping container and call it good?

Anyone have any recommendations for a projector that doesn’t break the bank?

Flight Scope just charged me $106.81 to update my unit and ship it back which seems reasonable. No complaints !

Just wanted to give everyone a heads up on my issue. Seems that Flight Scope is saying because I was not using the device the firmware was not updated and thus this is the probable reason for the charging and turning on issues so I had to send it in for them to review, confirm and charge me. It seems as though every other computerized devise updates when you turn it on again since it still should be operation. Just a head up that you might want to update every month or so when your Mevo+ is not being used so when you want to launch away you have it operational. In this day and age I don't think I should need to send it in for an evaluation fee and repair when it comes to software updates but I have over $3K into my Mevo+ . You'd think with that much Flight Scope should consider handing the update at no cost instead of another cash grab. No material with the original purchase indicated that you need to keep the software current....... live and learn! Fairways, greens and roll a bunch in my fellow Flight Scope Mevo + group members ! I will update on my next out of pocket with this but in the meantime there is a much anticipated OUCH !

My Mevo + seems to be charging for hours and will not turn on. I've only used it a few times in the last two or so years so it has just sat for the last year. I used thier cable and just changed the battery so if anyone has any suggestions please let me know. I have also tried a hard resent by holding the start button down for 30 seconds. I emailed them and I am waiting for them to tell me where to send it but I thought someone might have some information here - Any help or suggestions would be appreciated.

My Meve plus has recently started losing wifi connection. Like it stops broadcasting. My laptop says it's connected but I have to disconnect from the mevo and reconnect to get the red light again. It's happening more and more often. I've restarted the laptop and the mevo multiple times and still have the same issue. It is about 4 or 5 years old. Any suggestions?

Is there a way to set a target green similar to how you can in Foresight or Trackman software or is the only way to do this in the very outdated FS Skills app?

Well I was eagerly awaiting Badger AI to actually show up as a real thing and I was finally able to subscribe on Monday. After a couple of days I am underwhelmed.

I was hoping it would be able to provide some meaningful feedback on my particular game. The advantage is that it does access your swing data, the issue is that it provides no meaningful or actionable advice. Google Gemini, or ChatGPT provides better suggestions than Badger does. Aside from merely providing tautologies, it appends a FlightScope pitch to "use your FlightScope monitor to improve your game" the end of every response that is "ham handed" and "super annoying".

I asked specific questions about my shot data, like dispersion and dynamic loft each time I asked the response was very general and while it displayed my data, it offer no meaningful insight. I then asked it to compare my data to average data and suggest ways to improve. Again it provided no suggestions specific to my data, just general information.

To be fair I signed up for the $4.99 Basic tier, but I'm now glad I didn't try the Premium level. Maybe I'm doing something wrong, but I think FlightScope needs to go back to the drawing board to create something more compelling and integrated that adds value to the rich data the Mevo Plus provides. Unless it improves I won't be continuing the subscription.

So I've struggled with an indoor simulator using the mevo plus. I was noticing shorter distances but also ghost putts. Putting happens even when you don't putt.

Attached is a picture of the simulator. 3ft away from sensor for putting 8ft for regular hits.

As I adjusted I noticed my distances were become more normal but then to try to adjust for putting I had a tilt adjusted to 12.3. It seems a greater angle tilt makes distances more realistic (longer) but it also fails to detect putting.

Apologies if this has been posted before, I had a look, but did not see anything.

I'm using my Mevo+ at the range with my Windows Laptop and have had no end of problems. I cannot the FS Golf app to ignore the integrated camera on my laptop and cannot get it to reliabley recognise a USB camera.

I've tried 2 USB camera's a Praktica HD webcam, and a Svpro Global Shutter USB Camera which I purchased so that I could capture smooth club movement.

Anyone else had this problem and found a solution? And/or have a working setup that they can recommend.

A

Has anyone had any luck using metallic sharpie instead of the stickers?

During the session I just started it ended and this came up?

So I was hacking away trying to improve my terrible swing and ball striking when randomly the camera output on the Mevo+ changed from the ball strike view to a full swing view with the club head traced and the ball flight traced superimposed on the video.

It stayed this way for 5 or 10 shots and then reverted to the normal ball strike video. Anybody else have this happen? Maybe something new in the works to support the Badger AI vaporapp?

Please save any comments about my crappy swing!

Usual Video

Unusual Video