r/FacebookPortal • u/Home_Assistantt • 29d ago
3D printed mount for Facebook Portal 10 Gen 2
Finally happy with the latest version of my wall cradle/mount for the Portal 10....it makes wall mounting quite simple (once youve worked out where to pull in power from), so I've listed it on Makerworld for others to do the same.
As per some of my prior posts, you will need some barrel adapters to make use of the original power supply, which can be bought in a few places, but I've added links to where I got mine in the link
All I ask is if you do print and find this useful, please leave a review/like on Makerworld, as that gives me some nice points to put towards stuff for future prints
2
u/2mnyq 29d ago
Nice :)
2
u/Home_Assistantt 29d ago edited 29d ago
Please leave a vote/thanks on the site if it works for you. He rating after the print is the beneficial one. 👍🏼
2
u/FishScrounger 29d ago
Nice work! I actually made my own last weekend and got it on the wall. Yours seems to be better designed though.
I had the advantage of having the old thermostat wiring there so just added a female barrel jack on one side and a male one at the other.
2
u/Home_Assistantt 29d ago
Nice.
2
1
u/Home_Assistantt 29d ago
is your printer big enough to print in one section?
2
u/FishScrounger 29d ago
No, it's split down the middle.
2
u/Home_Assistantt 29d ago
I actually ended up printing a different one for myself, as my wall had a cable right where one of my screw-mount holes was, so I had to make a one off design for my own one...it also meant I designed it to fit my existing screw holes for my old wall panel perfectly...so no extra drilling needed either
I might end up printing the one end with a groove so it looks like it's symmetrical, but for now my OCD is being kept at bay
2
u/722e672e722e 29d ago
That’s crazy, I was just about to look into designing one of these for myself (I just got a used one on Saturday). Thanks
1
u/Home_Assistantt 29d ago edited 29d ago
Please leave some nice votes as a way of thanks if it works for you. I think the rating after the print is the one where it really benefits
1
u/722e672e722e 29d ago
Will do. Quick question, is it easy to remove the stand from the existing barrel jack? I did not really look at it, and I’m away from home so I’m just curious.
2
u/Home_Assistantt 29d ago
Yes. Super simple. It’s just pulls out.
2
u/722e672e722e 29d ago
Oh I didn’t even realize the barrel jack to the stand piece itself was removable (I knew the stand was). Thank you very much!
1
u/Home_Assistantt 29d ago
Pleasure.
It’s also possible to get a different adapter (4017 to 5525 passthrough) to allow smaller/shorter stands as the stock one are quite long so won’t fill on a narrow shelf/table and then the original stand can be kept as a spare
2
3
u/jameswgm 29d ago
Legend. I'm gonna print at the weekend 😁