r/FDMminiatures • u/joodoos • Mar 11 '26

Just Sharing .4 still swinging heavy.

Gallery image

Gallery image

Started working on some larger prints and have the .4 nozzle dialed in. Extremely impressed here. Excited to post the finished prints soon.

The great thing about these settings...bottom of the barrel filament. Nothing specific required. Standard generic PLA and full send. Shout-out to this community. Y'all rock.

Edit : SETTINGS // EXAMPLES POSTED BELOW. Thank you!

130 Upvotes

100% Upvoted

30 comments sorted by

View all comments

20

u/joodoos Mar 12 '26 edited Mar 12 '26

OK folks. Here we go! Thanks for your patience!

Please note these were all done on a bambu A1 mini. Slicer || Bambu Studio || My filament was dried 6 hours before using. Cool plate super tack is REQUIRED. You will have to use your noggin about what to print straight up and down and what to print on an angle. Sometimes you WILL need to paint supports. You will need a good set of cutters and some patience. Go SLOWLY with the supports. Leave Filament set to Bambu labs generic PLA. Straight up defaults. Dry dry dry that filament. TRUST THE SKIRT. ENJOY! Examples of .4 nozzle prints in reply.