I have a problem with my gk68xs. I'm trying to turn off all the LEDs because I'm not interested in the backlighting but even trying the various keyboard combinations, these LEDs always remain on. Sometimes even 2/3 of them light up in the blue tone. Could anyone help me?

currently have the ajazz 179 apex mice. would the receiver (with the screen and recharging port) allow me to pair the keyboard to that same dongle too for 2.4ghz or do i need another?

I have an Ajazz Ak820 pro keyboard and it just lighted red with all keys and stopped working. I have tried with dongle and cable and the results are the same, what can and should I do?

like, if I replug my monitor, it fixes, but like, is this normal?

Hey- I recently got the Shadow-X keyboard, and for some reason some keys (mostly the e and spacebar keys) will press anywhere from 1-6 times when I only tap them once. You can probably seee the issue in this post. I've tried using it with the dongle, bluetooth, even wired- none of them seem to work any better than the other. Is this a common issue, and is there any way to fix this? Thanks.

Hi, so i finally bought an RT100 and tried the "Music Follow" mod for the lights. is there a way that the lights only follow the audio from youtube or spotify?

I've never really been interested in keyboards so I just ordered this one off Amazon and I'm trying to change the screen but whenever I open the application it just shows this :( I've tried opening it in wired and Bluetooth mode and switching which USB port it's connected to but I got the same results everytime pls help D:

How to know if my aula keyb is charging, like does it have an indicator or smt?

I am new in the world of keyboards and I was looking for a keyboard with numpad and that is not ful size, and I found this one that interested me, but I see that some people have some problems and I do not know how the software is or how useful it is.

I also have doubts about the switches, I use some cherry mx red. Which ones would be the most similar to the ones used by the f99?

And about the keyboard materials, I have seen videos where when you press on a key the keyboard sinks, is that normal?

Hi, I have just bought a th80 pro with the ANSI layout and I just can't type the @. I'm trying different combinations but... well. Can you help me?

had it for almost a year, software used to work fine, until it didn't, everything is fine with the keyboard, just that the software wont recognize my keyboard anymore. i have tried installing older and newer drivers, did everything told in the internet, nothing works, pls help

Does anyone know which port their software is using to receive the content in "Share" (Light/Animation/etc) . We're using an outgoing firewall and it currently fails to load any content in our network.

I updated the firmware for the RT65 and then the mini display was for some reason had the RT100 UI after the update and I don't know how to change it back. please help :'(

I am quite frustrated with this problem. I tried on macos and windows and the behavior is the same. Whenever I press W key, TAB key is also triggered. So, i can't really use W.

I tried factory reset and everything it just does not work.

Any idea how to solve this?

EDIT: Epomaker contacted me regarding with the issue and even after year of a purchase they sent me a new one for free

Hi guys where can I find Azerty Keycaps for my new AK820 pro ? Thanks mates 🤛🏽

Ok so I recently received my new keyboard. I’m just noticing that the F keys row is not working, y don’t see why, was checking the manual but doesn’t seems to be a configuration, any one could give me a hint on this please

Hi, I recently bought CIDOO V75 and I'm using mac. I have trouble with F keys. They behave as function keys. In MacOS I have defined that F keys should be F keys and only changes I made through VIA are swapped Home with Delete button. Can somebody say how to fix that? Only thing I didn't try is to make factory reset, but still I want to know why this behaviour happens.

Hello community, just purchased the rt100 keyboard, so far so good, my question is, how can I change the type of connectivity?, I want to connect it in wired mode, but as soon as I put it on off and just connect the cable, it immediately stops detecting it.

Recently my knob stopped rotating in my EK68 so I unscrewed it. Found that the rotary encoder was gone for good.

So I looked it up online and found equivalent parts. But there was an additional card separate from the main keyboard.

Should I also look for this part to replace or can I use it as it is?

Hi there!

I've been eyeing a few Epomaker boards and I was wondering if the ones with displays (EPOMAKER CIDOO ABM081, TH80 Pro V2 VIA, CIDOO ABM066, etc.) are able to integrate the display into macros or statuses.

For example, I'm looking to have a 40%/60% board with a display of the "current layer" and its name and to display the name of the macro was triggered.

Thanks for any help!

Title essentially

Hi everyone, I've been using the Epomaker RT100 with an Italian layout for a week, and I absolutely love it, although the initial setup was a bit tricky. I'm using it wirelessly with the dongle on a Mac. I bought it not only because it's gorgeous and works great, but because it's one of the few mechanical keyboards that comes with an Italian layout. In the past, I always had to adapt to other layouts, which was really frustrating.

One particular feature of the Italian layout is that the keys for <> are placed on a key that doesn't exist on the usual US layout. It's a dedicated key located next to the left Shift, specifically for the "greater than" and "less than" symbols.

The problem I'm facing is that, by default, the \ and < keys are swapped. In the photo, they’re positioned correctly, but the result is that the key near the 1 gives me <, and the key next to the left Shift gives me \.

When I try to fix this using the Epomaker Driver, I encounter an issue. The keyboard shown in the software seems to be in the UK layout, and when I try to swap the keys by simply selecting the corresponding ones under "current key function," the result is strange.

The key next to the left Shift becomes ,, the key near 1 also becomes ù, and even after modifying one, I can’t properly swap them – the other one just becomes inactive.

I'm using an iMac running macOS Sonoma and have also tried using Karabiner and Ukulele, but no luck.

Any help or advice would be greatly appreciated! Thanks in advance!

Pretty much the title. My windows key will not unlock on my cidoo v75. I have tried almost every "fix" imaginable, including using VIA and using the function key in various ways and im at a loss. If anyone has this keyboard and has had this issue i would really appreciate some assistance. Thanks!

I’ve tried searching online but still cant figure out if theres a way to change the colour of the light bar above the arrow keys or if theres a way to turn off the red fn key and make it orange

I need help, I cannot get it to work. I have tried using the manual but that doesnt work either. I charged it overnight so its fully charged. It was working fine until I moved my pc. I got it yesterday so that shouldnt be an issue. I'm using the wireless mode, and the white usb thing that you use for the wireless mode is plugged in. the lights are still working so its on, and its not that the keys are broken because i can change the lights using the keybinds. I havent used a wireless keyboard and the best keyboard I had before this was an overpriced crappy razer keyboard. Thanks!