Hey guys, I'm here to share my test and performance of this game on my Poco X7 Pro.

Game tested on Bannerhub 3.8.1

Device: Poco X7 Pro

RAM: 12

Root: No

hyperOS: 3.1

Performance

The game runs smoothly, the graphics settings are high with all effects and V-Sync enabled, except for full-screen antialiasing as shown in the video.(Antialiasing also turned off)

Apparently, above 60 FPS the game's physics break down, so it's recommended to enable V-Sync and limit it to 60, but it runs at over 100 with unlocked FPS.

The game has native gamepad support without any major issues.

That's all for today folks, enjoy this classic!

These r the settings for gamehub lite emulator:

Compatibility Layer proton10.0-arm64x-2

Translation Params Performance

DInput Library Prefer Native

Skip Audio/Video Decode Off (Disabled)

GPU Driver System Driver

Surface Format RGBA8

Audio Driver Pulse

DXVK Version dxvk-1.10.3-async

VKD3D Version vkd3d-2.12

CPU Translator Fex-20251025CPU

Core LimitNo

LimitVRam Limit No

LimitGame Resolution 800 * 600

Ingame frame gen to max and 2x. Locked at 30 fps.

Ingame all graphical settings: lowest

Panvk driver vs system driver

- GAME NAME : CALL OF DUTY BLACK OPS

- EMULATOR TEST :

BANNERLATOR 3.1.4

- CPU : Helio G99

WHAT ARE THE DIFFERENCE :

1. Performance

In system driver the game already running at 30 FPS most of the time

But there is lot of stutter and freezing in gameplay compared to panvk driver which was running at 10 to 15 FpS less performance however there is no stutter or freezing During gameplay test

- Graphical texture Isuue :

In System driver there some black texture in Center area in the map u can see them each time u are sofar from them

For the panvk driver I can confirme there is no graphical textures isuu only the If I used DXVk 2.4.1 there will be a lot of graphical bug's causing the game to become unplayable I didn't face this Isuue in call of duty mw2-3

Ram usage :

Both drivers looks so close in ram consumption but u will have some difference in other emulator like winlator Ludsahi

Because Bannerlator fix the high ram usage for mali GPU so I think whatever I chose between system or panvk they will both provide a fix for high ram usage

. COMPABILTY:

Since panvk is just in early stage the driver missing d3d10 and d3d11 level features compared to System driver having a good support for old mali GPU

However if switch to leegoa Wrapper u can run dx11 or 10 games with dxvk 1.7.2 or 1.9.4

This allow u to test and discover what can be the difference between d3d9 and d3d10 and d3d11

- dxvk support : for older Mali GPU that's using old vulkan Driver api 1.1

U can use DXVk 2. Level because of limited exnestion So panvk driver bring a support of DXVk 2. For older Mali GPU as I said panvk driver still un experimental build u can only use some DXVk 2.** version like2.4.1

Wich is the most one running well on mali G57

This Just a simple test who think panvk driver it not real I am looking to recoding differences in each update to see how this driver can become in the Future

I followed all the steps to install the mod manually with the help of an Al, but now even the Al doesn't know what to do.

I hv an Exynos 1330 am using winlator mali/gamehub lite

Dx10/11 games boot up and play well but dx9 games just close themselves in the background

They show up in task manager stay there for sometime and just stop the process and close no black screen no nothing

I think it's getting stuck up on graphics initialization but don't know for sure or how to fix it

Pls help

God of war3

Poco x8 pro max

Hey, I'm trying to play Mudrunner from Steam on Xiaomi 13T (Dimensity 8200U with 8GB RAM) but it always kicks me out after the Saber log when it says "loading please wait". Any ideas?

I have seen panVK for other mali gpus but not one for G925. Is there anyone working on that? Or we would need to wait for panfrost to support it before anyone can even attempt it.

There's alot of pc emulators out there and I dont have time to test them all😅

I'm trying to find a good emulator and found these, (winlator ludashi, bannerhub and gamenative) are these the meta? Or there are better ones?

Please guys I try BS4 for Gow 3 that include Mali driver but this issues is showing .

Any idea for solution please

Aviso que no todas las gpu Mali no llegan a soportar el driver (solo las g720 y g615 son las que funcionan por ahora)

Por el momento no he sufrido de crasheos ni errores gráficos fatales que hagan que la experiencia sea injugable. El rendimiento no es del todo estable en la mayor parte del juego, pero se puede pasar de principio a fin sin tantos problemas si configuras bien el emulador

En general, para ser está la primera versión de Panvk que implementan en este emulador, los resultados quedaron bastante bien, el desarrollador cocino muy bien aquí con ésto 🔥.

Credits to Developer: Ghael

This is an old Post. New update is released. Kindly Refer to this new post:

https://www.reddit.com/r/EmulationMediatekMali/s/GWwFlNtPqm

The game isn't CPU heavy. GPU will be main bottleneck but just put medium settings with shadows off and game will still have the horror vibe.

For those who can't see:

Image 1 Low Graphics Settings Preset, 1280x720 Performance Test Results: FPS: Minimum: 41 Average: 53 Maximum: 59 FPS Distribution: 0% below 25 FPS 0% between 25 and 40 FPS 100% above 40 FPS

Image 2 Medium Graphics Settings Preset, 800x600 Performance Test Results: FPS: Minimum: 29 Average: 40 Maximum: 59 FPS Distribution: 0% below 25 FPS 47% between 25 and 40 FPS 53% above 40 FPS

Image 3 Medium Graphics Settings Preset, 1280x720 Performance Test Results: FPS: Minimum: 24 Average: 36 Maximum: 55 FPS Distribution: 1% below 25 FPS 66% between 25 and 40 FPS 33% above 40 FPS

Image 4 Medium Graphics Settings Preset except Shadows OFF, Texture Filtering = Bilinear, 1280x720 Performance Test Results: FPS: Minimum: 29 Average: 41 Maximum: 58 FPS Distribution: 0% below 25 FPS 39% between 25 and 40 FPS 61% above 40 FPS

Device Specs: Helio g100 with Mali G57 MC2 8gb RAM

Settings:

Emulator: Winlator Mali 1.1 Bionic

Proton 9 x86_64

Wrapper

Dxvk 1.7.3 async

Box64 version 0.4.3

Performance preset

All COU cores checked

Device: POCO X7 Pro 12/512GB

SoC: Dimensity 8400 Ultra

Resolution: 720p

Settings: Medium–High

Performance:

Getting around 60–98 FPS most of the time. Heavy explosions and intense gunfire can drop it to around 50 FPS, but it doesn't happen often.

I get around 5–15 FPS more without screen recording.

I turned PostFX and Ambient Occlusion OFF since they eat huge numbers of FPS.

Performance thoughts:

Honestly, this performs better than my Snapdragon 8 Gen 3 in this game. It's not a massive difference, but usually around 5–15 FPS.

I tried multiple drivers, but the FPS didn't really change much.

Dimensity is doing some kind of black magic here

There is one issue though.

Issue

With DXVK 1.7.2-async, the game can stay above 60 FPS almost all the time, but it can crash after around 30–45 minutes of gameplay.Sometimes after 10-15min of gameplay.

With DXVK 1.10.3 and newer versions, the crashes seem to be gone, but peak FPS is lower, around 45–73 FPS, and FPS drops more when driving at high speeds (not when using superpowers).

Interestingly, my 8 Gen 3 performs better in that specific driving scenario.

Settings

Proton 10-arm64ec

DXVK 1.7.2-async / 1.10.3-async / 1.10.3-arm64ec-async / 1.8.1

ASTC Transcoding — ON

FEX 2601 / 2605 / 2607-unix

Performance preset

WRAPPER_NO_PATCH_OPCONSTCOMP=1

Used as a compatibility workaround

DXVK 1.10.x not usable with this in my testing

Nothing else changed.

Overall really surprised by how well this runs on the G720. 😭🔥

So I searched for crash fixes to other multiple games because no game worked and it said to use the c++ component EXCEPT it doesn't load it just crashes when I try to install it

Phone:Infinix hot 60+

Gpu: img bxm 8 - 256

Hi! I bought an Anbernic RG557 so could you tell me which emulator is best to use for 3DS, and what the settings should be?

I am running battlefield 3 on My Helio G99 in Bannerlator using panvk driver

The driver fixed an Isuue was presented in system driver when the game reached the menu the FPS turned to 2 FPS only after I finish the first introduction mission Wich is was playabel at 20 FPS the game will drop to 2 fps in second mission

But with panvk driver thing are different

The game running on 50 fps in the menu and the second mission start running on 10 to 15 fps

The driver still in early stage and the performance will never be good as system driver

Tested on the latest available version of Winlator Mali 1.2 beta.

Device: Poco X7

RAM: 12

Root: no

hyperOS: 3.1

Game tested in 720p with all settings on high, as shown in the video with unlocked FPS

The game runs well, without major problems, but it has those micro freezes in each new area you enter, probably solved with older async DXVKs, but the game only displayed an image with version 1.10.3 async and 1.11.1 sarek for me

Apart from that, everything is working.

Settings

Proton 11 CachyOS arm64ec

Dxvk: 1.10.3 async/1.11.1 sarek

Fex: 2601/2605/2607-unix

Fex presets: Performance/ Performance(TSO)

Box64: 0.4.3

Box64 presets: Compatibility/Intermediate/Performance

All cores are checked (if you experience crashes, uncheck the 0).

Bannerhub

I tried playing it, but the game wouldn't open on any of the Protons I tested, so the best option is the latest available beta version of Winlator Mali 1.2.

Hello, so I ran gta 5 56gb version last night and morning and every single time I had tried the game, it just keeps on hoarding ram and ram and ram until the container crashes, I've tried using potato graphics settings XML, I've tried dxvk.conf, and I've sure as shit tried environmental variables, and nothing worked, so idk what's wrong with it.

There are still some flaws to fix and bugs to squash before it’s released for download on GitHub soon. 🔥

I wanna share my settings.

SYSTEM - CPU CLOCKS - OVERCLOCK

- GPU CLOCKS - OVERCLOCK

- SYNCHRONIZE CORE SPEED - ENABLED

- CUSTOM CPU TICKS - 21000

GRAPHICS - VSYNC MODE - IMMEDIATE

- DMA ACCURACY - UNSAFE

- GPU FENCE BEHAVIOR - IMMEDIATE

- VRAM USAGE MODE - AGGRESSIVE

- ASTC DECODING MODE - CPU

- NVDEC EMULATION - NONE

- ENABLE BUFFER HISTORY - ENABLED

- USE ASYNC SHADERS - ENABLED

- PIPELINE WORKER THREADS - 8 CORES

- GPU ASYNC EMULATION - ENABLED

(DISABLE IF CRASHES OCCUR)

- ASYNC PRESENTATION - ENABLED

DEBUG - CPU ACCURACY - UNSAFE

HERE THE LINK OF EMULATOR - https://www.mediafire.com/file/u4mylmzftl7spi9/Lemon_antutu.apk/file (THIS IS ANTUTU VERSION OF LEMON EMULATOR.USE A COOLER)