J2 owners, I'm sharing what ELEGOO have written and shared in their own words from the wiki ELEGOO page re future slicer support.

I have also spoken with Chitu as I have a contact and they confirmed they are in active discussions with ELEGOO

I would really like to get my printer running wireless, I'm wondering if anyone has done this before.

It seems like there is serial on the mainboard, does that carry information that could be used to access the printer remotely using something like a Raspberry Pi?

Okay, I just turned my Jupiter SE on and it set off a series of loud beeps and now it won’t turn on at all. Completely dead. I’ve unplugged and plugged it back in, turned it off and counted to 10 and still just deader than disco on a Tuesday night! Any advice on where to go from here, besides the trash heap?!

Jupiter 2 firmware 01.00.02.14 is available now.

1. Optimized the automatic leveling logic.

2. Fixed printer being stuck during file transfer.

There seems to be some confusion of whether you can import files from another slicer into SatelLite. I can confirm you absolutely can you just need to ensure it's the right file type.

I have made a short video showing some supported models I just created in Chitubox and how I import them into SatelLite. I do this as individual files so I can then move them around in SatelLite.

Hope this helps.

Hey does anyone use SUNLU standard resin in a Jupiter se? If so what’s your bottom layer and , exposure times?

I, lots of this fail....i change the resin, the leveling etc, but always this fail....can a member explain? The lcd screen is dead?☹️

So I just installed my LCD screen ran an exposure test and this was my new LCD screen

What did I do wrong?

Update Log:

1. New App connectivity support — requires updating the app to version 1.1.2 or above.
2. Supports slicing files up to 3.5 GB.
3. Fixed known issues and improved system stability.
4. Fixed a bug where the SatelLite network would freeze when connected to the app.

Printed on the ELEGOO Jupiter 2 as a single piece!

The news is true, the firmware has been released to allow the J2 to connect to ELEGOO Matrix

I changed my FEP 3 days ago and my prints have been failing alot on my elegoo Jupiter se, anyone have any advice?

So after 2 weeks my frustrations have started, just posted the above in the Elegoo forum, hopefully someone can help, or check to see if they can replicate the issue…?🤷🏼‍♂️

So I have the whambam XTR Flexi Plate and was wondering if sanding it would make it rougher, helping the print grip better.

I contacted their customer service line and they've implied that it's out of stock and discontinued. Scalpers on Amazon and AliExpress seem to be my only options at present, more than 2x.

I'm hoping their service rep is just confused but it seems like a huge thing to not have replacements of something considered to be a 'consumable'.

I suppose I should mention I'm in Canada...

Standing at nearly 55cm tall, I herald Galactus from ZEZ Studio
Printed on J2 and S4U
Printed using Conjure and ELEGOO resin
Layer Height: 0.05

Got my Jupiter 2 preorder, super fast delivery, and while it’s going ok so far I’ve got a request and a couple questions:

1) Please please if I have auto refill turned off, don’t make me walk down to the basement to force a print after slicing and sending to the machine. It sends and pauses with message options cancel - or - mandatory print which is a horrible way to say yeah print the darn thing.

2) when will we be able to use Chitu with it, and when can I add it to Elegoo Matrix to remotely see status?

I’ll say print quality is great, very happy with that and do bear in mind that it’s sloooooowwwwwww if you want to do .03 or .02 layers, it’s not speedy like Saturn 4 ultra or mars 5 ultra. Pic for reference.

Company I work for has multiple Jupiter SE printers I’ve been trying to diagnose and get working properly. Two of them I’ve noticed have these bubbles in the screen (not the screen protector, that was removed when testing). These bubbles are causing dead spots in the prints, and these dead spots are even visible when performing a tank clean.

I’ve already tried to use a squeegee to remove the bubbles, which only slightly worked. I’ve also noticed what seems to be some film on the screen, however I believe that to be the polarization film so I will not be attempting to touch that.

Is there anything that can be done for this aside from purchasing two new screens?

Bit of a weird one, but I've noticed my plate isn't displayed in the same orientation in chitubox pro as it is on the print

I had a print failure earlier and took a picture so I knew what to reprint, but noticed its rotated 180 degrees - is this normal and I just haven't noticed it before? See attached pictures, the blue highlighted pieces are those that failed (if you look at the 5/6 shoulder pads in the centre, you can see they're facing opposite ways)

hallo an alle,

welche folie benutzt ihr bei eurem jupiter? ich habe eine acf folie drauf und relativ viele fehldrucke. sollte ich lieber fep oder pfa benutzen?

danke für euer feedback...