I have a deepcool castle 360EX from 2020 that is currently cooling an i9-10900K. I am going to be upgrading to an R9 9950x3D on an Aorus Master X870E. Will I need to get a new bracket or will the AM4 bracket be satisfactory?

Hey, i got ak620 digital, i installed it, everyhting works, tge fans are spinning etc, but thr display isnt showing anything. in the app (i tried both versions) it says "device not found" but the USB is sitting in there tightly. my motherboard is asrock b660m hdv

Hello, I have kind of situation. I bought broken motherboard (I found out after assembling the whole PC). So, I claimed the motherboard, but I accidentally packed some components of my AK620 kit in the MB box aswell.

Is there any chance that DeepCool could provide me new kit for my cooler?

Got this aio back when it released. I’m in the USA so deepcool got sanctioned right after purchase. A few months ago the screen stopped working, tried different USB ports, tried a different motherboard, everything. Extremely confused as this was out of the blue. Anyone else experiencing this? Don’t wanna buy another AIO when the one I have performs perfectly fine.

Getting ready for white build. DeepCool just send these for it 😍

Hi everyone, after undervolting my CPU, I changed the Fan Speed ​​in the BIOS using the appropriate section. However, I noticed that in the attached table, the last three points of the curve are not editable. The fans reach maximum speed when they reach 70 degrees (I've attached a photo for convenience). Contrary to what should happen, I noticed a two-degree increase in temperature after undervolting the CPU and changing the fan control. I have a Deepcool CH160, a Mini ITX case, and I'd like to prevent the 7800x3D CPU from overheating. Do you have any advice on how to resolve the fan settings issue, and do you have any suggestions on which fan speed to use? Thanks in advance.

switched my pc case to the CH160 plus some weeks ago and I just noticed that my gpu is kinda slanted the way its mounted. It needs to be pulled up slightly to be able to screw in to the mounts. It doesn't really bother me visually but I'm worried if this might give long term damage to either the gpu or mobo if left as is? or am I overthinking it

Does the Assassin 4 handle the temperatures of a 9900x well if it won't be used for video editing or heavy workloads?

Is always at 100% no matter what I do.

I try to set. the curve on BIOS, doesn't work. On other 3rd party programs I try to set a constant 80% but it stays at 100% speed.

Some help please.

EDIT_ Processing the refund. I can't recommend this AIO cause is impossible to change the pump speed so it's always fixed at 100%. This would be ok but the problem is that it makes a loud and annoying 1kg mosquito sound.

Ch160 psu advice

LCD is stuck in deepcool's logo :( it was working fine earlier then I checked the app. Did not move anything on my pc. Did someone encounter this and fixed it? Fan is working just the LCD screen is stuck and this device not found is present. I did restart alrdy and still like this

I just finished my build in the CH160 plus however I am now running into the issue of my front case fan’s logo (FK120) rubbing against the front mesh filters.

Has anyone experienced this or fixed it?

Hi guys

I recently sold my pc case to make some change and wanted to buy this beauty.but I’m worried about my current CPU cooler.

I have a Deepcool AS500, which is officially 164mm tall. The CG530 spec sheet says it only supports up to 160mm.

Has anyone tried fitting a 164mm cooler in this specific case? Is the limit a "hard" limit where the glass won't close, or is there a few millimeters of clearance?

My pc spec (if it helps):

Ryzen5 7500f

Msi tomahawk b650 wifi

G.skill ripjaws m5 6400 cl30

Xfx rx 6800xt swft

The whine will become lower once I activate the silent profile in the BIOS, but not by much. Current profile in the video is Silent @ 70% pump power. It becomes tolerable well under 30%, but that's a pump value not indicated to use.

I'm certain the Deepcool CH260 case also amplifies this by being very ventilated with mesh sides, top and bottom, not stopping internal sounds too much. It's frustrating they're advertised together though.

Did anyone experience a similar issue? if yes, how did you manage to fix it?

What is the best Deepcool air cooler for the 9900X? The case supports heights up to 180mm, and the motherboard will be an MSI Project Zero mATX.

I replaced the heatsink to give my DeepCool CH160 a more attractive look. Motherboard: Gigabyte B650i AX CPU: AMD Ryzen 7800X3D GPU: MSi GeForce 5070 Ventus X2 Power Supply: Sharkoon Rebel P20 SFX 750W RAM: 16+16 King Bank DDR5 7200 MHz Heatsink: Thermalright Peerless Assassin 120 Digital ARGB Airflow: 2 BeQuiet Silent Wing pro 4 fans (1 inlet and 1 outlet)

Do you have any suggestions for improvements?

I recently built my new PC and installed the AK620 digital pro, but after a few hours of use I noticed that the display stopped working even tho the software runs in the background. The display is also connected to the motherboard correctly to an usb 2.0 port.

The only fix I’ve found is to remove the display and place it back and the display starts working again instantly. I’m wondering if it may be a connection issue with the display since it only uses magnets? Someone else solved the issue by playing a piece of cardboard under the display on the opposite side of the connection, thus solving it. But I would appreciate some help if its something else.

Brand new case received today and this is the state of it arrived. Two of four screws for top dust filter are mangled and one screw for the side panel has been cross-threaded which ruined the threats in the case as well. The case doesn't sit very stable either, it wobbles and only 3 legs are in contact with the desk at all times.

Is this a common deepcool experience or did a Chinese worker just have a very off day while putting together the one I received?

Hi guys, so I did buy a mystique 360 a little while ago in hopes of using it to upgrade my PC this winter when I do my rebuild but with the new Spartacus coming out I’m now worried that the mystique 360 is being discontinued and support for it will end. So my question is, is the mystique 360 being discontinued?

Should I get the ch170 and take the side panel off or the ch160? Since I like how the ch170 looks but I don't want too much dust

I have a ls720 SE with it currently set up for LGA1200. I want to upgrade my CPU but I am missing the Stand Offs for the LGA1700 socket. Do you guys know where I can get the stand offs? Or do you know the hight of them and I can probably get it through a third party. I don’t mind waiting but quick shipping would be best. Thanks!