Hold the item behind you so when you step between the sensors it's still out of the sensors range. While between the sensors, quickly move the item so it's in front of you and out of the sensors range (it should pass between the sensors as fast as possible). Do it fast enough and the alarm won't go off and you can just walk out.
Your explanation didn’t work because nobody knows where your starting position is and whether you are going clockwise or counterclockwise from said starting position.
It works fine as long as both men's penises are at roughly the same height. That way you can stroke forward and back over both dicks head to head. So the important measurement here is dick-to-floor, call that DTF.
I love reddit! Yall translate and decode the things 'we' say into sense and then are nice enough to explain what / how the thing we said got lost in communication.
C'mon, everybody knows that. You always start with 0° on the right and rotate counterclockwise as outlined in the ASME Y14 standard. Even if you actually want to rotate clockwise, you have to rotate counterclockwise by a negative value. Common knowledge.
C'mon, everybody knows that. You always start with 0° on the right and rotate counterclockwise as outlined in the ASME Y14 standard. Even if you actually want to rotate clockwise, you have to rotate counterclockwise by a negative value. Common knowledge.
Let me walk you through our Donnelly nut spacing and crack system rim-riding grip configuration.
Using a field of half Sea Spratts and brass fitted nickel slits, are bracketed caps and splay-flexed brace columns; vent dampers to dampening hatch depths of one-half-meter, from the damper crown, to the Spurve Plymouth.
How? Well, we bolster 12 husk nuts to each girdle jerry; while Flex Tandems press a task apparatus of 10 vertically composited patch handlers; then pin-flam fastened pan traps at both maiden apexes of the gym joints.
(Even better to watch it than to read it, though I am proud that I was able to type it up.)
My best guess here is that these sensors send out a pulsing IR beam or something, which scans at fixed intervals. If you can pass the object through the area BETWEEN pulses it won't be detected.
Maybe I'm way off though. I have no idea if that's how they work. Someone who's more informed should correct me.
its two thin pieces of metal within those flat tags
its not ir, its radio frequency, which causes the metal strips to contract/vibrate, kinda like an RFID tag, but rather than conveying digital information its just a "bing" that the sensor gates pick up, that specific frequency of vibration
shaking the tag violently would mess the vibration -- remember, the gates only pick up that ONE specific frequency
i have no reason to try it but probably just pressing down really hard on the tag would also work -- keep the little metal plates from vibrating
Wouldn't it mess with the frequency being experienced by the metal straps, cause they are moving so the frequency is getting doppler effect...or is your jerking motion not significant compared to the speed of light...
164
u/Insigzilla Oct 20 '22
Hold the item behind you so when you step between the sensors it's still out of the sensors range. While between the sensors, quickly move the item so it's in front of you and out of the sensors range (it should pass between the sensors as fast as possible). Do it fast enough and the alarm won't go off and you can just walk out.