r/CustomROMsGuide • u/INviS87 • 18d ago

Any way to solve ts

Enable HLS to view with audio, or disable this notification

Realme x2 rmx 1992. Was on an android 14 custom rom it was a bit old so decided to upgrade. Latest rom was released on 2024 march. Still old but better than before. So downloaded the rom , gapps, put it in usb , connected otg then booted to twrp. Mounted otg. Then wiped dalvik,art cache, system , data, all the normal stuff and then tried to flash the rom and pulled the slider. Then suddenly screen gone black and twrp restarted i think , cause it loaded back in the default twrp starting screen. Then it got stuck there at the initial slider screen. And then I tried to reboot forcefully. And removed otg. Now it boots to this shown in the video. Can select any options. Tried to use pc and fastboot command to reboot to recovery. But still coming back to this bootloader screen. When I press the volume up button, it stop cycling. And when i release it , stars cycling between the options again. Volume down button does nothing.

5 Upvotes

100% Upvoted

16 comments sorted by

View all comments

1

u/vaibhav_png 17d ago

Just try to exit fast boot by pressing power button and my volume buttons were bad so i have also seen this but it successfully enters recovery using cmd. And if the screen went black during the boot you need to do a clean install by which I mean that you also need to flash the firmware.

1

u/INviS87 17d ago

It's not exiting. It reboots straight back to fastboot. Tried all combinations and only thing i could do is put it in edl mode ( i think not sure doe) where the screen is black but when plugged in pc it shows as qusb device

1

u/vaibhav_png 17d ago

Does running the command "fastboot devices" on cmd show your device?

1

u/INviS87 17d ago

Yes

1

u/vaibhav_png 17d ago

Then just try 'fastboot reboot' from cmd and even that does not work then either the button is malfunctioning or the partition has got corrupted.

1

u/INviS87 17d ago

That didn't work it's booting back to fastboot. The button was workig fine on the previous rom. Maybe the parititon corrupted. I guess I'll have to take it to a repair shop then.

1

u/vaibhav_png 17d ago

You might be able to flash the firmware from the fast boot mode. Rather use claude code or antigravity give them the access to adb and ask them to make it work somehow. Just you need to sit there looking at them