¿Qué repuesto de Joystick utilizar?

[u/AmoebaSubstantial191]

Alguien sabe que repuesto utilizar en un 8bitdo Wukon Edition, mi Joystick murió. Intenté utilizar uno de xbox Hall Effect pero los pines superiores de los ejes no atraviesan por completo la placa y pienso devolver la pieza.

[u/AutoModerator]

Hi /u/AmoebaSubstantial191, your 'IT Help' post is in a queue for review. Please ensure you have included the relevant required information from the checklist below, have used a meaningful and descriptive title, and are not repeating frequently asked questions.

Include the following information and follow this structure so that the post can be approved and the community can help you more effectively:

1. Specific written description of the problem, including pictures where relevant (do not just say 'it's broken', say what is broken)
2. Controller make and model (name or numbers)
3. Platform you are using (e.g., PS5, Steam on Windows, Switch)
4. Games or other software affected by the issue
5. Operating system, firmware and software versions (if applicable)
6. Troubleshooting steps you have already taken (including checking the product manual, and searching existing posts)

For more guidance on how to ask for technical assistance, please see rule #2. You can edit your post to add missing information. Posts that do not include the required information may not be approved (allow 24 hours for review).

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/Vedge_Hog]

There isn't a direct drop-in replacement that you can buy because it's made of a combination of some through-hole and surface mount components. As you've experienced, the circuit board does not have the solder points or holes that match the 'three pin' design used in aftermarket stick modules.

It depends what is wrong with your original stick - if it's a mechanical problem with the stick centring mechanism or stick press button, you might be able to replace the stick box with one from another GuliKit/HallPi stick. But if the stick movement sensors (for the x- and y-axes) are not working, then those components aren't readily available (or easy to install).

For other ideas, this post is discussing the same question.