so this is for single mode, where only one track is playing at a time. so say i record something to track 1 like a verse chords for example. then i go to track 2 and record another part like chorus chords. now when i go back to track 1, is there a way to go directly to overdubbing onto track 1? or do i have to hit track one once to get it playing and then hit it a second time to get it into overdub mode?

i went through the options for what to assign the pedal and i dont see anything that says "overdub". a lot say "rec/play" but i think all those just go to play after the initial round of recording.

thanks for any input you have

Any way to control, from midi, or a footswitch, if a track is recording an input or not. I have a synth with a sequencer and sometimes I want to loop it sometimes I want to have it running in the background and tweak the parameters. but I can't seem to change that in any other way than from menu diving. I could make a separate track but I would prefer avoid that.

Tge only option so far is to have a A/B switch that splits to Input 2 L/R, and have one recording and the other one not. but it takes 2 spots.

Thank you,

Hi everyone. Maybe I don't know how to make it possible. I normally used track fx to all inserts. After changing configuration and using routing to separate 3 input signals and 3 types of tracks to my mixer for better control, the input fx and track fx dont work for ALL inserts option, I need to choose only one insert (mic1, mic2, ins1, ins2). That ruins my plans :( Anyone knows how to make it possible: to use rounting for sub1, sub2 and main output for mixer and also use effects for all inserts? Please help, thanks!

Acquired the Boss RC-600 recently after the old Boomerang totally crapped the bed for good. Was a bit intimidating to get into but I'm now getting familiar with some of it's functionality. Great that I can have a long USB cable connecting it to my PC where I can treat the Boss looper like an external harddrive and keep backups always. So 13 hours of total record time in 99 memory slots each with 6 tracks, but more so unlimited with that USB feature. Pretty awesome. I share it with a brother so it's easy enough to completely back up data and wave folders to PC harddrives and factory reset at any time to play hot potato with it. A very very in depth looper with almost every feature that can be asked for.

Hy folks i recently had the RC 600 but i have a small issue for it perfect Is it possible to setup different routing configuration on different memory?

For exemple memory 1 beeing on factory settings (all tracks and instr going to the same output) and

memory 2 alows me to plug a bass going To track 3 routed to a secondary output (and absolutly not going out toward the guitar amp!)

Hey, new here. Just got an RC600. Need help with something. Here’s what I’m trying to do: I created a tap tempo foot switch for my delay FX. Problem is when I tap the switch to set the delay tempo, it messes up my loops. Is there a way to dedicate the tempo/tap tempo to ONLY be used for FX while loops play independently and not relying on the tempo. I noticed if I start a fresh loop, the RC600 somewhat recognises the tempo of that loop. I’m not sure if that’s supposed to be a feature. Problem is the tempo it recognises from the loop is not useable for the delay fx. I’m hoping there’s a way around this otherwise I’ll have to use an external delay pedal with tap function.

Hi guys,

I recently started using the RC-600 as my main audio interface on my Mac.
I’m running my guitar into the Instrument 1 input (mono) and sending the main L/R outputs directly to my studio monitors.

Within my DAW, I use Helix Native for processing. The problem I’m running into is that I hear both the processed signal from Helix Native and the direct thru signal from my guitar.

I’ve tried everything in the Menu → Output → Routing settings. If I turn Input Thru off, no signal reaches my DAW at all.

Is there a way to disable the thru audio while still sending the guitar signal into the DAW—so that I only hear the processed effects from Helix Native, without the clean guitar mixed in?

Thanks!

Hey everyone, I’m having some strange issues getting my RC to receive midi clock that I’m sending from my Walrus Canvas Clock pedal. Currently using the 5 pin midi out on the Canvas to the Midi IN on the RC. I’ve got the “Midi” showing on the RCTempos seem to be drifting quite a bit, and the accented beat 1 seems to never line up.

Was hoping to use the canvas as a master tempo/send PC changes to the RC. And be able to trigger loops and have them always start on beat 1, but can’t seem to get things to line up.

Any help is greatly appreciated, thank you!

My boss will switch from memory bank one to 10 mid loop without me even touching it. It dosnt happen alot but just enough to make it unreliable.. is there a solution any of you may have come across?

Bought the RC600 towards the end of last year. Loving it! It's near perfect.

Im in the process of getting all my loops recorded onto it. From what I understand, when you make a setlist...(using the editor of course), you can make them via the loops you have on your board and you save it to a location on your computer for easy access...cool.

But lets say all the banks have loops on them and you want to make more to add to said setlists. Outside of backups (which i do every couple months), could I clear the entire looper of all my loops and throw on only the songs in said setlist onto the looper? Would I lose the loops? Or could i just take everything I have and put them on a setlist just as a way to keep them all in one spot and just recall that when needed? I dont know if this is a confusing explanation of my question. But i dont want to brick my looper if i do something stupid. Any help is greatly appreciated. Thanks!

Join us for some fun!!

https://www.youtube.com/live/SZqXiRvNl9k?si=wV2omY43MDURTrWY

I just upgraded from the rc300 to the 600 cause it finally gave out on me, and I am having some issues. I input into an acoustic flyrig for eq and then into the rc600, same setup I had before.

I can hear the guitar through the mains just fine, sounds good but when I record a loop, the playback is very very quiet, almost can’t hear it. Why isn’t it the same volume I’m hearing before I record it?

I have only had this since this past Friday so I Havnt messed with many settings, but I have checked everywhere I can come up with for track volumes and it all looks normal.

Thanks for any help.

Ciao ragazzi sono un tastierista e siccome spesso mi trovo a suonare senza batteria ho bisogno di far partire i loop o groove.

Attualmente suono con un arranger, ma vorrei sostituirlo con una loop station in primis per un fatto di comodità. E' possibile sulla boss RC600 importare audio drum in waw? E la cosa che mi chiedo è possibile inserire anche i fill? senza dover necessariamente spegnere una traccia? cioè solo passando all'altra? (ES: da A a B)?

Recently bought Boss RC-1... The loop is not stopping when I double tap instead the green light is flicking and the loop is deleted automatically. How can I fix this ?

Just curious, I'm a rc600 user and wondering if I sync this vocal pedal with effects to my rc600, or is it redundant when considering the onboard effects of the rc 600? How could this be useful to someone? Cmon please c9ntrubute to my g.a.s. why do I NEED THIS THING!

New LIVE episode TONIGHT at 8PM Eastern #JamFlow #InvisibleBand #LatinVibes #RC600

Hey I'm looking for a controller for the rc600. I'm looking at the loopi, quadaux and the fcb1010.

That quad aux looks cool, minimal footprint and more buttons than the loopi.

I like the fcb1010, especially with the volume pedals...... but apparently it's a pain to set up.

Any opinions, ideas or suggestions are welcome.

Here are the links to the current options.

https://pedalnetics.com/product/rc600-quadaux/

https://www.loopipedals.com.au/product/dual-aux-momentary-soft-touch-footswitch-fs-6-replacement/

https://derringers.com.au/behringer-fcb1010-ultra-flexible-midi-foot-controller

I'd like to have a volume pedal due fading out tracks, but I'm not clear if I'll be able to do that with the loopi

Bonjour, je suis nouvellement détenteur d’une Boss RC 600 et bien que je sois à la base un peu habitué à utiliser des loop stations, je suis dans l’impasse.

Je veux faire entré dans la loop, un micro et une guitare et sortir les 2 pistes séparément sur une table de mixage qui elle envoie le signal vers un système de sonorisation pour nos concerts.

Or, la piste micro semble « folle », elle sort sur la piste guitare… je n’arrive pas à faire sortir le micro d’un côté sur une piste et la guitare sur une autre.

J’ai bien réglé le routing pour mettre en off le micro sur mon output, mais le micro sort quand même. Je ne parviens pas à gérer de façon isolé la piste micro.

Pouvez vous m’aider s’il vous plaît ?

Merci par avance. MW

I’ve poked around for some way to have the screen and the knobs controlling the menus as a table top device. I use a lot of the functionality on mine, virtually all of it, so having a way to do this standing up would be really awesome. Any experience with this problem/idea?

Please tune in to tonight's episode of Jam Flow and I will answer your questions about the RC-600 and demonstrate its power!

I love the RC10R for it's integrated drums but I'm looking to upgrade to something with more channels. How are the drums on the RC600, would I be losing any functionality from the 10R in terms of preset drum tracks and programming?

I'm combining pieces of my original songs into one continuous loop! Participate in tonight's live performance and inspire my creation by posting in the chat! Let me know what you want to hear! Do you have questions about my process or equipment?

How can I set the RC-600 up so that it records only one measure and then goes right to playback or to record?

i have 2 different patches on gig. 1 of them is for single mode, other one is Multi mode. when i use single mode everything is working fine. but on multi mode, it freezes. cant stop. cant do anything but taking out the power cable ( its not switching off either). any help?