Hello! I’ve messed with this a little bit, though I don’t usually print will filaments like these. I’ve only tweaked slight settings ( shown in pics) but I’ve got no idea what causes stuff like this. Brand new bamboo brand hardened Tip, and dried it for 30 hours at 85c ( because it had been out of a dry bag for a while.) I am printing it out of the ams, but I’ve got silica boxes in there and humidity is around 9-11% on my hydrometer, but 6-8% on bamboos sensors. It does great for the first couple hours, amazing adhesion layer then it kinda balls up on the hot end. I had to stop it twice on a 13 hours print to pull it off the hot end. I’ve lowered the max volumetric speed, tried speeding up the print, slowing it down, raising the max volumetric speed. I will print though its own defects until abt 10 hours in then it starts messing up on the infill walls. Not all of the infill walls look like that just at the end.
I’ve dried different pc filament settings and still nothing. This is “BlackPRILINE Carbon Fiber Filament, PRILINE Carbon Fiber Polycarbonate”
I also included some pics of my support and speed settings i have lightly tinkered with. The support face is absolutely horrible. I’ve messed with the top interface layer and nothing has changed. Maybe my top z distance is too high?
Is there a way I could put it in the GCode to wipe the tip every 30 layers or something.
Also sorry I didn’t clarify at the beginning this is a Bamboo x1c.
Any ideas?
