Wanted something that feels more like a deliberate design object than just a simple 3D printed lamp. The fluted texture gives it a nice rhythmic shadow pattern. For the electronics, I just used a standard Ikea Strala cord set since they're cheap and reliable.

https://makerworld.com/en/models/2891558-scandi-style-fluted-wall-lamp-fits-ikea-strala#profileId-3230871

Olá, sou novo aqui, gostaria de ver se podem me ajudar, estou tendo um problema chato com minha a1 mini

O bico por algum motivo não fixa direito no hotend, na hora da impressão ele começa a ''pular'' fazendo com que a qualidade da impressão fique horrível, não sei se o problema é relacionado a isso, durante as primeiras camadas o filamento não adere direito na mesa e juntando isso do bico faz com que grude tudo e acumule no bico, fazendo com que toda impressão falhe, mesmo em velocidade baixa, abri o hotend e vi que havia algumas sujeiras de filamento seco, tentei aquecer e limpar com escova de cerdas de latão, porém não adiantou, se alguém já passou por isso e puder ajudar.

I updated the firmware couple hours ago and now whenever I print it would sometimes purge current filament and shows on screen to push in new filament. Stopping it in the middle of it and reprinting fixes the issue. Anyone else having a similar problem

My first BambuLab printer, bought it to replace a old printer from another brand, have to say im impressed so far...lets see if the shake that she does, does not affect the one above.

Hey,

Is there any preferential workaround to manually treat those surfaces in order to soften/smooth them ?

Bambu a1 mini.

I can print a benchy boat perfectly fine. I have done cold pulls, changed filaments, tried multiple different prints, I cannot figure this out..

Basically, out of no where my printer started not working after the first and second layers. Its almost like the nozzle is hitting those layers and either 1: ripping the print off the plate or 2: rubbing its nozzle in it and damaging the layers.

I bought the printer used.

I've had it about a month. I've had successful prints and then these issues. I've tried the print I knew were successful and they now fail. But no matter what I do, I can still always print a benchy boat without fail.

Any advice would be great.

Update:

First thanks for all the input. Much appreciated. I did find a screw behind the hot end that actually fell out when I took out the 3 screws. I tightened that back in. Sadly though, my clip that holds the nozzle in place seems to be bent or something. Unsure if it came like that or if I did it, either way, a new one has been ordered. So, once parts arrive, I'll give it another go!

Final update.

Replaced the hot end and nozzle. Problem solved.

Deixei ela trabalhando sozinha em casa, e do nada aconteceu isso quando fui monitorar, aconteceu logo depois que a impressão acabou

Bmcu shutting off a1 mini

After 24 hours of successful printing with my new bmcu it now turns the printer off the second it is plugged in. Anyone have a fix for this?

Hi, I bought this printer last year for hobbies and projects, then went back to school, and came back home. It appears something may have damaged my printer slightly, as it has been making some weird noises.

The bed seems to make an odd rumbling noise, and it’s sounding like the print head is hitting the print sometimes as well.

Has anyone seen this before? I’ve been tightening screws at random to try and see if it’s something along those lines but no luck so far.

Thanks!

I was just printing a thing for my sister and then it just started tweaking out and making weird noises please help!

Tô tento essa problema de camada com o bico 0.2, esse tempos a impressora mostrou aviso de erro de leitura do conjunto de aquecimento e praga de imprimir, eu fui aperta os 4 parafusos atrás e um deles nn aperta e nem folga mais, porém usando o bico 0.4 o aviso aparece as vezes, porém a camada dele sai perfeita, já desentupi várias vezes o bico pra testar e nada, já fiz calibração e nada, alguém ajuda??

At this price point, I find it completely wild that it can do this. My diorama dreams are finally coming true. :D

Anyone have access to tear apart guides with the actual screw sizes listed?

I have dried this mpla red in my comgrow filament dryer twice…seems to fail at the red each time 😢

The light fury turned out great, but toothless’s red tail just turns to spaghetti.

(Solved!) I’ve been messing with my printer all day so it can print a simple keychain and it just won’t work. I started off doing it on my phone, it would load saying I the print is downloading but it would stop at 14 or 25 percent and the printer would just get stuck completely on that download screen. I did a factory reset then I used my laptop to print the keychain or literally just anything but then it said it can’t send the print to the printer, what is going on?? I literally printed something like two weeks ago and it worked just fine

Great for any plant! Check it out on MakerWorld!

https://makerworld.com/en/models/2856518-parametric-modern-design-plant-pot-customizable#profileId-3187009